Key specifications
- Product type
- Built-in hot/cold simulated stone shelf
- Installation
- Flush to countertop, bottom mounted
- Construction
- Simulated stone surface with insulated stainless steel and aluminized housing
- Usable shelf space
- 30 in W x 18 in D
- Temperature control
- Electronic
- Control box
- Power On/Off switch and two digital temperature controllers
Hatco HCSSBP-3018 Simulated Stone Hot/Cold Shelf, built-in, flush with counter top, 30"W x 18"D, electronic temperature control, attached control
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Hatco HCSSBP-3018 is a built-in, flush-to-countertop hot/cold shelf with a simulated stone surface and a 30 in W x 18 in D usable heated or cooled area.
It transitions between hot and cold modes in as little as 30 minutes. The unit uses self-contained, bottom-mounted refrigeration with R-290 refrigerant and includes an electronic control system with a control box, power switch, and digital temperature controllers.
- Built-in installation designed to sit flush with the countertop
- Foodsafe simulated stone surface
- Insulated stainless steel and aluminized housing
- Made in the USA and cULus listed
Overall Dimensions:
33.0"W x 21.0"D x 10.17"HProduct Weight:
150.0 lbHot/cold operation
The shelf transitions from hot mode to cold mode, or cold mode to hot mode, in as little as 30 minutes.
Built-in flush installation
Designed to be bottom mounted and installed flush with the countertop.
Simulated stone surface
Features a foodsafe simulated stone surface.
Electronic temperature control
Includes a control box with a power On/Off switch and two digital temperature controllers.
Self-contained refrigeration
Uses a self-contained refrigeration system with bottom-mounted equipment.
R-290 refrigerant
The condensing unit uses R-290 refrigerant.
Insulated housing
Constructed with insulated stainless steel and aluminized housing.
Documentation
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.