Hatco GRAML-108D6 Glo-Ray® Heat Lamps
Hatco GRAML-108D6 Glo-Ray® Heat Lamps is backordered and will ship as soon as it is back in stock.
Documents
Related Searches
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.
Hatco GRAML-108D6 Glo-Ray® Heat Lamps
Description
Hatco Glo-Ray® GRAML-108D Max Watt Dual Infrared Strip Heater – 108"
6540 W • 6" Spacer • Integral Lights • Remote Controls IncludedGive every plate the just-made taste it deserves. The 108"-wide Hatco Glo-Ray® GRAML-108D blankets even the largest pass-throughs or buffet lines with consistent infrared heat, keeping food at safe, serve-ready temperatures without over-cooking or drying out.
Why you’ll love it
- Maximum watt output — 6540 W. Delivers 25 % more heat than standard high-watt models for faster recovery and rock-steady holding temps.
- Dual tubular metal-sheathed elements. Pre-focused infrared pattern eliminates cold spots across the full 108" span.
- 6" (152 mm) spacer. Creates a deeper heating envelope, ideal for high-volume pans, tall to-go packaging and side-by-side mounting.
- Built-in shatter-resistant display lights. Warm incandescent lamps spotlight the food while protecting it from glass fragments.
- Rugged extruded aluminum housing. Will not sag and is fully insulated to minimize heat loss.
- Remote control enclosure & angle brackets included. Mount out of the heat zone for long switch life and cleaner counters.
- Simple, field-friendly installation. Supplied with a 36" (914 mm) flexible metal conduit and 42" (1067 mm) leads.
- Certified cULus & NSF; proudly Made in the USA.
Technical details
| Model | GRAML-108D |
|---|---|
| Overall width | 108" / 2743 mm |
| Depth × Height | 18" D × 2.5" H (with 6" spacer) |
| Wattage | 6540 W @ 240 V (Max Watt) |
| Voltage & Amps | 120/240 V, 1-phase | 27.3 A heat circuit + 120 V light circuit |
| Shipping weight | ≈ 64 lb / 29 kg |
| Heating elements | Two tubular metal rods, 6" on-center |
| Lamp type | Shatter-resistant incandescent (optional halogen) |
| Included hardware | Angle mounting brackets, remote control enclosure with toggle switch & indicator light |
| Certifications | cULus, NSF |
Mounting & clearance
- Target mounting height with 6" spacer: 21–27" (533–686 mm) above the holding surface.
- For pass-through use, maintain a minimum spacing of 3" (76 mm) between stacked units.
- Remote control enclosure must be mounted outside the heat zone.
Always follow the Hatco installation manual and local electrical codes.
Hatco backs every Glo-Ray® heater with 24/7 parts and service assistance throughout the U.S. and Canada.
