Hatco

Compact Floor Model Electric Booster Water Heater, 6 Gallon, 57 kW, 208V, 3-Phase

SKU: C-57-208-3-QS
GTIN: 61570000994
$4,857.05
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Compact Floor Model Electric Booster Water Heater, 6 Gallon, 57 kW, 208V, 3-Phase

Stainless Steel Front Panel, Powder-Coated Body, 6-Inch Plastic Non-Adjustable Legs

Built for commercial dish rooms, this compact booster heater delivers 180°F final rinse water from a 6-gallon tank with fast 57 kW electric recovery.

  • Compact electric booster heater for commercial dishwashing final rinse applications.
  • 6-gallon storage capacity with 57 kW output for rapid recovery.
  • 208V, 60 Hz, 3-phase electrical service.
  • Castone® lined tank with built-in safety controls and factory pre-plumbed/pre-wired convenience.
  • Stainless steel front panel and powder-coated silver-gray hammertone body.
  • Standard 6-inch legs; slide brackets are available for under-dishtable mounting.

Overall Dimensions:

18.0"W x 24.0"D x 18.0"H

Product Weight:

142.0 lb

6-Gallon Storage Capacity

Provides 6 gallons (23 liters) of storage for hot water supply in a compact footprint.

57 kW Electric Output

High-output electric operation supports fast recovery in demanding dish room applications.

180°F Final Rinse Supply

Designed to deliver the 180°F (82°C) final rinse water needed to sanitize and flash-dry dishes and flatware.

Castone® Lined Tank

Durable Castone® lined tank construction with a 10-year limited warranty on the lining.

Factory Pre-Plumbed and Pre-Wired

Includes a calibrated immersion thermostat and high-temperature limit switch for easier installation.

Built-In Safety Controls

Includes a temperature/pressure relief valve, pressure reducing valve, two temperature/pressure gauges, high-temperature limit control, pilot indicator light, on-off switch, and low-water cut-off.

Corrosion-Resistant Exterior

Features a stainless steel front panel with a powder-coated silver-gray hammertone body.

Easy Service Access

Swing-away front panels provide quick access to probes and elements for simpler servicing.

Flexible Mounting Options

Standard 6-inch non-adjustable legs are included, and slide brackets are available for under-dishtable mounting.

Water Quality Requirement

Incoming water above 3.0 grains of hardness per gallon must be treated and softened to help protect performance and operating life.

Type Booster Heater
Style Compact
Installation Type Floor Model
Capacity 6 Gallons
Watts 57 kW
Voltage 208 Volts
Hertz 60 Hz
Phase 3-Phase
Amps 158.3 Amps
Breaker Size 200 Amps
Material Steel
Finish Powder-Coated Silver-Gray Hammertone
Interior Finish Castone® Lined
Country of Origin USA
Selling Unit Each
Units Per Case 1
Shipping Width 18 Inches
Shipping Depth 24 Inches
Shipping Height 18 Inches
Shipping Weight 142 Pounds

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified

Warranty & Protection

10-year limited warranty on the Castone® lined tank.

Frequently Asked Questions

It supplies 180°F final rinse water for sanitizing and flash-drying dishes and flatware.
This model is rated at 57 kW and requires 208 Volts, 60 Hz, 3-phase power.
The storage capacity is 6 gallons (23 liters).
Yes. Slide brackets are available for mounting under a dishtable, and the unit can also be installed on its standard 6-inch legs.
It includes a temperature/pressure relief valve, pressure reducing valve, two temperature/pressure gauges, a high-temperature limit control, a pilot indicator light, an on-off switch, and a low-water cut-off.
Yes. Water above 3.0 grains of hardness per gallon must be softened before being supplied to the booster heater.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.