Hatco

Hatco Compact Electric Dishwasher Booster Water Heater, 6 Gallon, 5 kW, 208V, 1-Phase

SKU: C-5-208-1-QS
GTIN: 61570000961
$2,514.05
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Hatco Compact Electric Dishwasher Booster Water Heater, 6 Gallon, 5 kW, 208V, 1-Phase

Stainless Steel Front Panel, Powder-Coated Body, 6 Inch Legs

A space-saving 6-gallon electric booster heater that delivers 180°F final rinse water with factory pre-plumbed convenience and built-in safety controls.

  • 6-gallon compact booster heater designed to supply 180°F final rinse water for dishwasher sanitation and flash drying.
  • 5.0 kW, 208V, 60 Hz, 1-phase operation for commercial dish room use.
  • Castone® lined tank and fiberglass insulation help retain heat and support long service life.
  • Factory pre-plumbed and pre-wired with temperature/pressure relief components, gauges, and safety controls.
  • Stainless steel front panel, powder-coated silver-gray body, and 6" legs fit tight installations.
  • Made in USA and supported with 24/7 parts and service assistance in the U.S. and Canada.

Overall Dimensions:

13.0"W x 20.75"D x 19.75"H

Product Weight:

115.0 lb

Compact Dishwasher Booster Design

Space-saving electric booster heater provides the final 180°F rinse water needed to sanitize and flash-dry dishes and flatware.

6-Gallon Storage Capacity

Holds 6 gallons of water for compact dish room installations.

Castone® Lined Tank

The tank is Castone® lined for durability and is covered by a 10-year limited warranty.

Pre-Plumbed and Pre-Wired

Factory configuration includes calibrated immersion thermostat and high-temperature limit switch for easier installation.

Built-In Safety Components

Includes a temperature/pressure relief valve, pressure reducing valve, two temperature/pressure gauges, high-temperature limit control, pilot indicator light, on-off switch, and low-water cut-off.

Durable Cabinet Construction

Standard stainless steel front panel and powder-coated silver-gray hammertone body provide a clean, commercial appearance.

Easy Service Access

Swing-away front panels allow quicker access to probes and elements for maintenance.

Water Quality Requirement

Incoming water above 3.0 grains per gallon must be softened before use to help protect performance and operating life.

Type Booster Water Heater
Style Compact
Installation Type Floor Model
Capacity 6 Gallons
Voltage 208 Volts
Hertz 60 Hz
Phase 1-Phase
Watts 5 kW
Amps 24.1 Amps
Breaker Size 30 Amps
Water Inlet Size 3/4 Inch NPT
Water Connection Required
Color Silver-Gray
Finish Powder-Coated Silver-Gray Hammertone
Country of Origin USA
Selling Unit Each
Units Per Case 1
Shipping Width 13 Inches
Shipping Depth 21 Inches
Shipping Height 20 Inches
Shipping Weight 115 lb.

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified

Warranty & Protection

10-year limited warranty on the Castone® lined tank.

Frequently Asked Questions

It provides the 180°F final rinse water required to sanitize and flash-dry dishes and flatware.
This model operates on 208 Volts, 60 Hz, single phase, and is rated at 5.0 kW.
The storage capacity is 6 gallons.
It includes a temperature/pressure relief valve, pressure reducing valve, two temperature/pressure gauges, high-temperature limit control, low-water cut-off, pilot indicator light, and on-off switch.
Yes. Incoming water above 3.0 grains of hardness per gallon must be softened before being supplied to the booster heater.
The Castone® lined tank includes a 10-year limited warranty, and the documentation also mentions 24/7 parts and service assistance in the U.S. and Canada.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.