Hatco

Hatco Compact Electric Booster Water Heater, 6-Gallon, 27 kW, 480V, 3-Phase, with 6-Inch Legs

SKU: C-27-480-3-QS
GTIN: 61570000981
$3,875.30
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Hatco Compact Electric Booster Water Heater, 6-Gallon, 27 kW, 480V, 3-Phase, with 6-Inch Legs

Stainless steel front panel, powder-coated silver-gray hammertone body, Castone®-lined tank

Built for busy dishrooms, this compact 27 kW booster heater delivers dependable 180°F final-rinse water in a small footprint.

  • 27 kW electric output supports 180°F final-rinse water for dishroom sanitation.
  • 6-gallon storage capacity helps maintain a steady supply of hot water.
  • 480V, 3-phase operation matches high-demand commercial electrical service.
  • Castone®-lined tank, fiberglass insulation, and built-in safety controls support reliable performance.
  • Stainless steel front panel with a powder-coated hammertone body adds durability.
  • Includes 6-inch legs and can be installed beside the dishwasher with slide brackets.

Overall Dimensions:

18.0"W x 24.0"D x 18.0"H

Product Weight:

142.0 lb

Compact Space-Saving Design

Designed to fit beside the dishwasher and save floor space in the dish room.

6-Gallon Storage Capacity

Holds 6 gallons of hot water to support the final rinse cycle.

27.0 kW, 480V, 3-Phase Operation

High-output electric configuration for commercial dishwashing applications.

Castone®-Lined Tank

Durable tank lining helps extend service life and carries a 10-year limited warranty.

Safety and Control Package

Includes a temperature/pressure relief valve, pressure reducing valve, dual gauges, high-temperature limit control, pilot light, on-off switch, and low-water cut-off.

Factory Pre-Plumbed and Pre-Wired

Arrives with internal plumbing, a calibrated immersion thermostat, high-temperature limit switch, and 3/4" NPT inlet/outlet fittings.

Durable Exterior Construction

Features a stainless steel front panel and powder-coated silver-gray hammertone body.

6-Inch Plastic Non-Adjustable Legs

Provides the standard support base for floor placement.

Fiberglass Insulation and Swing-Away Front Panels

Helps minimize heat loss and improves access for service.

Type Booster Water Heater
Style Compact
Installation Type Floor Model
Capacity 6 Gallons
Material Steel
Finish Powder-Coated Silver-Gray Hammertone
Watts 27 kW
Voltage 480 Volts
Phase 3-Phase
Hertz 60 Hz
Amps 32.5 Amps
Breaker Size 50 Amps
Country of Origin USA
Selling Unit Each
Units Per Case 1
Shipping Width 18 Inches
Shipping Depth 24 Inches
Shipping Height 18 Inches
Shipping Weight 142 Pounds

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified

Warranty & Protection

10-year limited warranty on the Castone®-lined tank.

Frequently Asked Questions

It is designed to provide 180°F (82°C) final-rinse water for sanitizing and flash-drying dishes and flatware.
This model is rated at 27.0 kW, 480 Volts, 60 Hz, 3-phase.
The storage capacity is 6 gallons (23 liters).
It includes a temperature/pressure relief valve, pressure reducing valve, two temperature/pressure gauges, a high-temperature limit control, a pilot indicator light, an on-off switch, and a low-water cut-off.
The compact design can be installed next to the dishwasher with slide brackets or on 6-inch legs.
Yes. Incoming water above 3.0 grains of hardness per gallon must be treated and softened before being supplied to the booster heater.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.