Hatco 3CS-9-240-1-QS Quick Ship Commercial Faucets & Plumbing
Hatco 3CS-9-240-1-QS Quick Ship Commercial Faucets & Plumbing is backordered and will ship as soon as it is back in stock.
Documents
Related Searches
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.
Hatco 3CS-9-240-1-QS Quick Ship Commercial Faucets & Plumbing
Description
Hatco 3CS-9 “Quick Ship” Sanitizing Sink Heater — 9 kW, 240 V / 1-Phase
Undersink electric heater for 21"–25" (533–635 mm) square 3-compartment sinksKeep a continuous 180 °F (82 °C) sanitizing rinse in your third sink compartment without giving up valuable sink space. The Hatco 3CS-9 mounts cleanly under the bowl, heating and holding water to NSF-approved temperatures so staff can wash, rinse and sanitize faster. This Quick Ship model leaves our warehouse in days, not weeks—perfect for tight project timelines.
Key benefits
- 9 kW rapid recovery: Heats 140 °F supply water to 180 °F in ±30 minutes and maintains temperature during peak use.
- Space-saving undersink design: Installs between the drain lines—no deck-mount heaters or extra plumbing required.
- Stainless steel front & dual-reservoir tank: One chamber houses the element, the other traps soil for easy draining.
- Simple controls: Toggle power switch with yellow Power On light plus red Over-Temp alert.
- Built-in safety: Energy Cut-Off (ECO) automatically disconnects elements if water level or temperature is unsafe—just refill & reset.
- Pre-assembled for fast install: Ships with template, gaskets, unions & drain hose—drill two 2" holes and hook up.
- Durable Hatco construction: Silver-gray hammertone powder-coat body with IFS antimicrobial finish.
- cULus, NSF listed and proudly Made in the USA.
- 5-year limited warranty with 24/7 parts & service (U.S./Canada).
At-a-glance specs
| Model | 3CS-9 (Quick Ship) |
|---|---|
| Recommended sink size | 21" – 25" (533 – 635 mm) square basin |
| Heating kW | 9 kW |
| Electrical | 240 V, 60 Hz, 1-Phase |
| Full-load amps | 37.5 A |
| Field wiring | 6 AWG copper, 50 A breaker/fuse |
| Overall dimensions* | 16.88" W × 12.63" D × 9.75" H (429 × 321 × 248 mm) |
| Shipping weight | ≈ 27 lb (12 kg) |
| Certifications | NSF, cULus |
| Country of origin | USA |
*Dimensions to top of flanges. See official Hatco spec sheet for detailed drawings.
Installation & operation
- Mounts beneath center sink; allow 4" (102 mm) clearance at rear for conduit & drain.
- Two 2" (51 mm) holes required in sink bottom (template included).
- Incoming water hardness should not exceed 3.0 GPG; use a softener if necessary.
- For complete instructions download the Hatco 3CS installation manual.
