Groen

Groen TDH-24C 24-Quart Gas Tabletop Tilting Steam-Jacketed Kettle

SKU: TDH-24C
$16,105.00
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Groen TDH-24C 24-Quart Gas Tabletop Tilting Steam-Jacketed Kettle

Classic Controls, 2/3 Jacket, Right-Side Console

A compact 24-quart gas kettle that combines Classic water-resistant controls, durable stainless steel construction, and one-person manual tilting for efficient batch cooking.

  • 24-quart (6-gallon) tabletop tilting kettle built for commercial batch prep.
  • Classic electronic controls are housed in an IPX6-rated, water-resistant enclosure.
  • 2/3 steam jacket and 304 stainless steel liner promote even heating and durability.
  • Manual arm-style tilt with a right-side support console helps deliver controlled pouring.
  • 31,000 BTU/hr gas-fired heat source with 120V control power and 50 PSI working pressure.

Overall Dimensions:

25.63"W x 25.5"D x 26.63"H

Product Weight:

220.0 lb

Classic Electronic Controls

Includes an on/off switch with indicator light, temperature control knob with 1 to 10 increments, heating light, and low-water warning light.

IPX6 Water-Resistant Enclosure

Controls are housed in a right-side water-resistant trunnion enclosure designed for wet kitchen environments.

Arm-Style Manual Tilt

Hand tilt design allows precise pouring, and the tilt handle can be field-reversed for right- or left-hand operation.

2/3 Steam Jacket

Self-contained gas-heated steam source provides consistent kettle heating without a remote steam supply.

304 Stainless Steel Construction

One-piece welded stainless steel kettle with a 304 stainless steel liner and exposed stainless steel surfaces for durability and cleanup.

Gas-Fired 31,000 BTU Burner

Efficient fin-tube burner assembly delivers the 31,000 BTU/hr firing rate used on the 20/24-quart models.

Built-In Safety Systems

Includes safety tilt cut-off, pressure relief valve, high-limit pressure switch, low-water cut-off, and a 24-volt control system.

Factory-Charged Jacket

The unit is factory charged with water and rust inhibitors to support long service life and low maintenance.

Commercial Compliance Ratings

Documented as NSF listed, cCSAus certified, and IPX6 rated; made in the USA.

Type Steam Jacketed Kettle
Style Tilting
Installation Type Countertop
Capacity 24 Quarts
Controls Classic
Material Stainless Steel
Interior Finish 304 Stainless Steel
Finish Bright High Buff
BTU 31,000 BTU
Temperature Range 150° F to 295° F
Voltage 120 Volts
Amps 1 Amp
Hertz 60 Hz
Gas Connection Size 1/2 Inch NPT
Gas Inlet Pressure 3.5 Inches W.C. Natural Gas / 10 Inches W.C. Propane
Country of Origin USA
Selling Unit Each
Units Per Case 1
Shipping Width 26 Inches
Shipping Depth 26 Inches
Shipping Height 27 Inches
Shipping Weight 220 lb.

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified

Warranty & Protection

Standard limited warranty: 12 months from installation or 15 months from shipment, whichever occurs first.

Frequently Asked Questions

The TDH-24C has a 24-quart capacity, which is equal to 6 gallons.
It uses Classic electronic controls in a water-resistant IPX6-rated enclosure.
The unit requires 120 VAC, 1 amp, 60 Hz electrical service.
It requires a 1/2 inch NPT gas inlet connection.
No. It is a self-contained steam-jacketed kettle with a gas-heated steam source built into the unit.
The document specifies operation from 0 to 2,000 feet elevation.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.