Groen DHT-60C TA/3 60-Gallon Gas Tilt Cooker/Mixer Kettle with Console-Mounted Tilt-Out Twin-Shaft Scraper Mixer
Groen DHT-60C TA/3 60-Gallon Gas Tilt Cooker/Mixer Kettle with Console-Mounted Tilt-Out Twin-Shaft Scraper Mixer
Classic Controls, 2/3 Steam Jacket, Floor-Mounted Console
Built for high-volume batch cooking, this gas-heated tilt cooker/mixer combines a 60-gallon kettle, twin-shaft scraper mixer, and washdown-rated controls in one heavy-duty floor-mounted unit.
- 60-gallon tilt cooker/mixer designed for large-volume batch preparation.
- Self-contained gas-heated steam source provides kettle temperatures from 150°F to approximately 295°F.
- Classic electronic controls are housed in an IPX6-rated, water-resistant enclosure for easier washdown cleaning.
- Console-mounted tilt-out twin-shaft scraper mixer helps prevent scorching and can be removed for cleaning.
- Heavy-duty stainless steel construction includes a 316 stainless steel interior liner and 304 stainless steel exterior/control console.
- Standard fittings include a 2-inch TDO, 10-gallon etch markings, and a double pantry faucet.
Overall Dimensions:
47.0"W x 43.88"D x 46.25"HProduct Weight:
1060.0 lb60-Gallon Floor-Mounted Kettle
High-capacity cooker/mixer kettle built for commercial batch production.
2/3 Steam Jacket
Self-contained, gas-heated steam source eliminates the need for a remote steam supply and supports cooking temperatures from 150°F to approximately 295°F.
IPX6 Classic Controls
Right-side water-resistant trunnion enclosure with power ON-OFF switch, temperature control knob with 1 to 10 increments, heat indicator light, and low-water warning light.
Console-Mounted Twin-Shaft Scraper Mixer
Tilt-out agitator assembly includes an anchor-type main agitator and a counter-rotating bar agitator; both are removable for cleaning or use without the mixer.
Stainless Steel Construction
316 stainless steel one-piece welded interior liner, 304 stainless steel control console and exterior, reinforced rim, and stainless steel base with adjustable bullet feet.
Built-In Safety Features
Includes heat cut-off above 10 degrees of tilt, pressure relief valve, high-limit pressure switch, low-water cut-off, 24-volt control system, and agitator safety tilt cut-off.
Standard Fittings
Supplied with 2-inch TDO, 10-gallon etch markings, and a double pantry faucet.
Electrical and Gas Requirements
Requires a 1/2-inch NPT gas line, 115V/1-phase/60Hz power for the kettle, and 208V 3-phase power for the agitator motor; control box may be mounted remotely to an adjacent wall.
Certifications & Compliance
Warranty & Protection
12 months from installation, 15 months from shipment, or 2,000 operating hours, whichever occurs first.
Frequently Asked Questions
Need Help Deciding?
Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.