Groen

Groen DHT-40C,TA/3 40-Gallon Gas Floor-Mounted Tilt Cooker/Mixer with Twin Shaft Agitator

SKU: DHT-40C,TA/3
$105,355.00
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Groen DHT-40C,TA/3 40-Gallon Gas Floor-Mounted Tilt Cooker/Mixer with Twin Shaft Agitator

2/3 Jacket, 316 Stainless Steel Liner, Classic Electronic Controls

Built for high-volume batch cooking, this gas tilt cooker/mixer combines a jacketed kettle, twin-shaft scraper agitation, and water-resistant controls in one floor-mounted unit.

  • 40-gallon floor-mounted cooker/mixer with tilt-out twin shaft scraper agitation.
  • Self-contained gas-heated 2/3 steam jacket eliminates the need for a remote steam source.
  • 316 stainless steel kettle liner and stainless steel construction support durability and sanitation.
  • IPX6-rated classic control enclosure helps protect key controls during washdown cleaning.
  • Includes 2" TDO, 10-gallon etch markings, and a double pantry faucet.
  • Requires 115V single-phase control power, 208V three-phase agitator power, and a 1/2" NPT gas connection.

Overall Dimensions:

47.0"W x 34.0"D x 43.13"H

Product Weight:

890.0 lb

40-Gallon Cooking Capacity

Sized for high-volume batch cooking and mixing in foodservice operations.

Self-Contained 2/3 Steam Jacket

Gas-heated steam source is built into the unit, so no remote steam source is required.

316 Stainless Steel Kettle Liner

One-piece welded interior liner is designed for durability and sanitation.

Twin Shaft Scraper Mixer

Console-mounted tilt-out mixer uses an anchor agitator and a counter-rotating bar agitator for thorough product movement.

Classic IPX6 Control Enclosure

Right-side water-resistant trunnion enclosure includes power switch, temperature control knob, heat indicator, and low-water warning light.

Tilt Design With Safety Shutdowns

Includes tilt shutoff, pressure relief valve, high-limit pressure switch, low-water cut-off, and agitator safety tilt cut-off.

Service Requirements

Requires 1/2" NPT gas connection, 115V/60Hz power for the kettle, and 208V three-phase power for the agitator motor.

Included Kettle Fittings

Supplied with 2" TDO, 10-gallon etch markings, and a double pantry faucet.

Type Cooker/Mixer
Style Tilt
Installation Type Floor Model
Capacity 40 Gallons
Material Stainless Steel
Interior Finish 316 Stainless Steel
Finish Bright Semi-Deluxe
Controls Classic Electronic
Temperature Range 150°F to 295°F
Pressure Rating 50 PSIG
BTU 100,000 BTU
Gas Type Natural Gas or Propane
Gas Connection Size 1/2 Inch NPT
Voltage 115 Volts
Phase 1-Phase
Hertz 60 Hz
Amps 5 Amps
Agitator Voltage 208 Volts
Agitator Phase 3-Phase
Country of Origin USA
Selling Unit Each
Units Per Case 1
Shipping Width 47 Inches
Shipping Depth 34 Inches
Shipping Height 44 Inches
Shipping Weight 890 lb.

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified
Certified badge of CSA Certified
CSA Certified

Warranty & Protection

12 months from installation, 15 months from shipment, or 2000 operating hours, whichever comes first.

Frequently Asked Questions

No. It has a gas-heated, self-contained steam source built into the unit.
It is designed for natural gas or propane; the gas type must be specified at order.
The kettle requires 115V, 60Hz, single-phase power, and the agitator motor requires 208V three-phase power.
The kettle interior is a one-piece welded 316 stainless steel liner.
Yes. The main and secondary agitators use bayonet connections for quick removal.
Yes. The document notes that the control box may be mounted remotely to an adjacent wall by the customer.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.