Groen

Groen Dual 20-Quart Gas Steam Jacketed Tilting Kettle Cabinet Assembly with 36-Inch Stainless Steel Base

SKU: 144061
$31,520.00
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Groen Dual 20-Quart Gas Steam Jacketed Tilting Kettle Cabinet Assembly with 36-Inch Stainless Steel Base

Cabinet-mounted boiler, 2/3-jacket kettles, hand tilt, electronic ignition

This compact dual-kettle system combines two stainless steel tilting kettles with a cabinet-mounted gas boiler for efficient batch cooking in one integrated station.

  • Two 20-quart stainless steel tilting kettles provide flexible batch-cooking capacity.
  • Cabinet-mounted gas boiler delivers 200,000 BTU/hr input with electronic ignition.
  • Hand tilt with support arm helps control pouring and emptying.
  • Integrated flush-mounted sink and hot/cold swing-spout faucet simplify operation.
  • 36-inch stainless steel cabinet base includes removable doors and adjustable feet.
  • Pre-piped design includes automatic drain and front-access controls for easier service.

Overall Dimensions:

36.0"W x 34.25"D x 43.63"H

Product Weight:

695.0 lb

Dual 20-Quart Tilting Kettles

Includes two stainless steel steam-jacketed kettles with a hand-tilt design for controlled pouring.

Cabinet-Mounted Gas Boiler

Gas-heated boiler supplies approximately 10 PSI steam to the kettles for steady cooking performance.

Electronic Ignition

Standard electronic ignition helps simplify startup.

Integrated Sink and Faucet

Features a flush-mounted pouring sink with a removable anti-splash screen and hot/cold swing-spout faucet.

Stainless Steel Cabinet Base

36-inch cabinet base includes removable access doors, side and rear panels, and adjustable feet.

Safety and Control Package

Includes gas control valve, power-on switch, reset light, start switch, pressure gauge, water level sight glass, low water sensor, and pop safety valve.

Automatic Drain Function

Boiler automatically drains when powered off after the water cools to reduce sediment build-up.

Elevation Setup

Configured for operation at elevations from 0 to 2,000 feet.

Type Gas Steam Kettle Cabinet Assembly
Style Tilting
Installation Type Floor Model (With Cabinet Base)
Capacity 2 x 20 Quarts
Material Stainless Steel
Interior Finish 304 Stainless Steel
BTU 200,000 BTU/hr
Voltage 115 Volts
Amps 15 Amps
Hertz 60 Hz
Phase 1-Phase
Water Connection Required
Drain Connection Required
Gas Connection Size 1/2 Inch NPT
Gas Inlet Pressure Natural Gas: 5 to 14 Inches W.C.; Propane: 11 to 14 Inches W.C.
Water Inlet Size 3/8 Inch NPT Hot, 1/2 Inch NPT Cold
Drain Connection Size 1-1/4 Inch NPT
Country of Origin USA
Selling Unit Each
Units Per Case 1
Shipping Width 36 Inches
Shipping Depth 35 Inches
Shipping Height 44 Inches
Shipping Weight 695 lb.

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified
Certified badge of UL Certified
UL Certified

Warranty & Protection

12 months from installation, 15 months from shipment, or 2,000 operating hours, whichever occurs first.

Frequently Asked Questions

The unit includes two 20-quart stainless steel tilting kettles.
It requires a 1/2 inch NPT gas connection, 3/8 inch NPT hot water, 1/2 inch NPT cold water, a 1-1/4 inch NPT drain, and 115 volt, 60 Hz, single-phase electrical service at 15 amps.
Yes. It includes a flush-mounted pouring sink with a removable anti-splash screen and a hot/cold swing-spout faucet.
Available accessories include lift-off kettle covers, basket inserts for the kettles, and basket inserts with brush kits.
The boiler has a 200,000 BTU/hr input rate and delivers about 120,000 BTU/hr to the product.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.