Glastender, Inc.

Glastender GT-18+1 18-Inch Front-to-Back Pass-Thru Rotary Rack Glasswasher Station

SKU: GT-18+1
$8,522.80
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Glastender GT-18+1 18-Inch Front-to-Back Pass-Thru Rotary Rack Glasswasher Station

Low-Temperature Chemical Sanitizing, Fill & Dump Design

A compact pass-thru glasswasher that delivers high hourly throughput, simplified chemical dosing, and easy service access for busy bar stations.

  • Front-to-back pass-thru design with a built-in rear drain table for manual loading.
  • Low-temperature chemical sanitizing system washes up to 720 2-1/2-inch glasses per hour.
  • Intelligent microprocessor control delays cycle start when incoming water is below 120°F.
  • Automatic peristaltic pumps dispense detergent, sanitizer, and rinse aid; prime switch simplifies startup.
  • Removable top and side panels, lift-out components, and unlatching spray box make cleaning easier.
  • Includes two 16-inch polypropylene racks and two curtains.
  • Stainless steel construction with adjustable feet and a 1/6 HP recirculation pump.

Overall Dimensions:

18.0"W x 41.06"D x 38.5"H

Product Weight:

155.0 lb

Front-To-Back Pass-Thru Design

Built-in rear drain table supports manual loading by a cocktail server while keeping the work flow efficient.

Front-To-Back Pass-Thru Design

Low-Temperature Chemical Sanitizing

Designed for chemical sanitizing operation rather than high-temperature sanitizing.

Low-Temperature Chemical Sanitizing

High Hourly Capacity

Cleans up to 720 2-1/2-inch diameter glasses per hour and handles glassware up to 10 inches high.

Intelligent Microprocessor Control

Delays cycle start by up to two minutes when incoming water is below 120°F to help maintain wash performance.

Automatic Chemical Pumping

Peristaltic pumps accurately dispense detergent, sanitizer, and rinse aid; prime switch supports quick chemical priming.

Easy-Service Construction

Removable top, removable side panels, lift-out drive wheel and glass rack, and an unlatching spray box simplify cleaning and maintenance.

Included Accessories

Comes with two 16-inch diameter polypropylene racks and a set of two curtains.

Stainless Steel Construction

Stainless steel cabinet, tanks, legs, and components provide durable commercial-duty construction.

Type Glasswasher Station
Style Front-to-Back Pass-Thru
Installation Type Floor Model
Controls Microprocessor
Capacity 720 2-1/2 Inch Diameter Glasses Per Hour
Material Stainless Steel
Voltage 120 Volts
Amps 3.5 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 6 Feet
Water Inlet Size 1/2 Inch
Drain Connection Size 1-1/2 Inch
Water Connection Required
Drain Connection Required
Country of Origin USA
Selling Unit Each
Units Per Case 1
Shipping Width 18 Inches
Shipping Depth 42 Inches
Shipping Height 39 Inches
Shipping Weight 155 Pounds

Frequently Asked Questions

It washes up to 720 glasses per hour when using 2-1/2-inch diameter glasses; it can also handle up to 600 2-3/4-inch diameter glasses per hour.
The maximum glass height is 10 inches, including pitchers and wine carafes.
It operates on 120V, single-phase, 60 Hz power and includes a 6-foot NEMA 5-15P grounded cord. A dedicated 15 amp circuit is recommended.
It uses a 1/2-inch water supply adapted to 3/8-inch FMPT and a 1-1/2-inch drain tailpiece. The unit has a built-in air gap, so a vacuum breaker is not required.
The unit includes two 16-inch diameter polypropylene racks and two curtains.
It requires extra heavy duty non-foaming commercial liquid dishwashing detergent, liquid chlorine bleach sanitizer adjusted to 50 ppm, and liquid rinse aid for proper sheeting.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.