Glastender, Inc. Elevation E-FS12 Underbar Hand & Wet Waste Sink, 2-Compartment, Stainless Steel, 12"W x 24"D

SKU: E-FS12
$2,543.75

Want to speak to an expert?

The E-FS12 combines an upper hand sink and a lower wet waste sink in one underbar fixture. Its stainless steel construction includes back and side splashes, adjustable bullet feet, a 4-inch splash-mount faucet, soap dispenser, and front-flush C-fold paper towel dispenser.

The lower wet waste sink includes a lift-out perforated plastic strainer. The two bowls measure 9-1/4 inches wide by 11-1/2 inches front-to-back by 6 inches deep, and only the lower sink drain is plumbed.

Overall Dimensions:

12.0"W x 24.0"D x 38.0"H

Product Weight:

75.0 lb

Two-compartment sink design

The upper hand sink drains into the lower wet waste sink.

Stainless steel construction

The product is specified with stainless steel construction and a one-piece seamless top and backsplash.

Hot and cold water faucet

Includes a backsplash-mounted faucet on 4-inch centers; hot and cold water connections are required.

Integrated dispensers

Includes a soap dispenser and front-flush C-fold paper towel dispenser.

Lift-out wet waste strainer

Includes a perforated plastic strainer that lifts out of the lower wet waste sink.

Back and side splashes

Includes a backsplash and left and right side splashes.

Adjustable bullet feet

Includes adjustable stainless steel bullet feet.

Product Type Underbar hand and wet waste sink
Sink Compartments 2
Bowl Dimensions 9-1/4" W x 11-1/2" front-to-back x 6" deep
Construction Stainless steel
Top Stainless Series 300 series
Sink Bowl Material Type 304 stainless steel
Exposed Surface Material Type 201 stainless steel
Faucet Mounting Backsplash-mounted on 4" centers
Faucet Compliance NSF/ANSI 61 and 372 low lead compliant
Water Supply Hot and cold water connections required
Drain 1-1/2" I.P.S. threaded drain; only the lower wet waste sink drain is plumbed
Backsplash Height 8" above the work surface
Drainboards Without drainboards
Legs 1-5/8" diameter, 16 gauge stainless steel
Overall Width 12"
Overall Depth 24"
Overall Height 38"
Product Weight 75 lb

Certifications & Compliance

Certified badge of ETL Listed
ETL Listed
Certified badge of NSF Certified
NSF Certified
Certified badge of CSA Certified
CSA Certified

Warranty & Protection

Glastender warrants all products to be free of defects in material and workmanship.

Frequently Asked Questions

The E-FS12 is 12 inches wide by 24 inches deep by 38 inches high.
The two bowls measure 9-1/4 inches wide by 11-1/2 inches front-to-back by 6 inches deep.
The upper compartment is a hand sink that drains into the lower wet waste sink.
It includes a backsplash-mounted faucet on 4-inch centers that requires hot and cold water connections and is NSF/ANSI 61 and 372 low lead compliant.
Only the lower wet waste sink drain is plumbed.
The product includes a soap dispenser, front-flush C-fold paper towel dispenser, and lift-out perforated plastic strainer for the lower wet waste sink.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.