Glastender, Inc.

Glastender C2SB36 36-Inch Two-Zone Side-Serviced Back Bar Cooler

SKU: C2SB36
$5,666.65
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Glastender C2SB36 36-Inch Two-Zone Side-Serviced Back Bar Cooler

2-Section, Bar Profile, Self-Contained, 12-Inch Door Opening

This 36-inch two-zone back bar cooler keeps beer and wine at serving temperature while fitting cleanly beneath the bar with side-service access and front venting.

  • 36-inch, 2-section bar profile cooler with two configurable temperature zones.
  • Self-contained, side-serviced refrigeration with front venting simplifies installation and service.
  • 12-inch door opening, locking doors, and heated mullion support secure, everyday bar use.
  • Stainless steel interior and LED lighting help create a durable, attractive display.
  • R290 refrigerant and automatic condensate evaporation mean no drain connection is required under normal conditions.
  • Configured capacity includes up to 100 750 mL wine bottles or 4 1/6-barrel kegs, depending on setup.

Overall Dimensions:

36.0"W x 24.13"D x 35.0"H

Product Weight:

317.0 lb

Two-Zone Beverage Storage

Supports separate beverage temperature combinations for beer and wine service.

36-Inch, 2-Section Cabinet

Compact back bar footprint with two sections for organized product storage.

12-Inch Door Opening

Model-specific door opening size suited to smaller bottle and keg configurations.

Side-Serviced, Self-Contained Refrigeration

Built-in refrigeration package is accessed from the side for easier installation and maintenance.

Front Venting

Designed to exhaust heat through the front, helping it fit into tighter bar spaces.

Stainless Steel Interior

Durable, easy-to-clean interior construction for busy commercial environments.

LED Interior Lighting

Bright lighting improves visibility of stored product.

Heated Mullion and Locking Doors

Helps minimize condensation between doors and secure inventory after hours.

R290 Refrigerant and Automatic Condensate Evaporator

Uses R290 hydrocarbon refrigerant and does not require a drain connection under normal conditions.

Draft Beverage Compatible

Can be configured for direct draw draft beverage dispensing with compatible towers and accessories.

Type Two-Zone Back Bar Cooler
Style Bar Profile
Installation Type Undercounter
Compartments 2
Capacity 100 750 mL Wine Bottles
Temperature Range 34°F to 65°F
Refrigeration Type Self-Contained
Refrigerant Type R290 Hydrocarbon
Interior Finish Stainless Steel
Color Black
Finish Black Vinyl-Clad
Voltage 120 Volts
Amps 2.75 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 8 Feet
Breaker Size 15 Amps
BTU 1,000 BTUH
Drain Connection Not Required
Selling Unit Each
Units Per Case 1
Shipping Width 36 Inches
Shipping Depth 25 Inches
Shipping Height 35 Inches
Shipping Weight 317 lb.

Frequently Asked Questions

The cooler can be configured for Beer/White wine, Beer/Red wine, or White/Red wine temperature combinations, with ranges from 34°F to 65°F depending on the selection.
No. It includes an automatic condensate evaporator and does not require a drain connection under normal installation conditions.
It requires 120V, 1-phase, 60 Hz service on a dedicated 15A circuit and ships with an 8-foot NEMA 5-15P grounded cord.
Yes. The bar profile cooler line can be configured for draft beverage dispensing, and compatible towers and beverage accessories are available.
This model has a 12-inch door opening, and the specification sheet lists capacity for up to 100 750 mL wine bottles or 4 1/6-barrel kegs, depending on configuration.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.