Glastender, Inc.

Glastender C1SB36-DD Draft Dispensing Cooler, One Zone, Side Serviced, Bar Profile, 36-Inch Wide, Two-Section

SKU: C1SB36-DD
$5,062.20
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Glastender C1SB36-DD Draft Dispensing Cooler, One Zone, Side Serviced, Bar Profile, 36-Inch Wide, Two-Section

Self-Contained Refrigeration, Bright White LED Lighting, Stainless Steel Top

Purpose-built for draft service, this 36-inch side-serviced cooler combines self-contained R290 refrigeration, keg racks, and bright white LED lighting in a bar-profile footprint.

  • 36-inch, two-section draft dispensing cooler designed for side-service bar installations.
  • Self-contained refrigeration with R290 refrigerant and a 1/8 HP compressor.
  • Bright white LED interior lighting and a stainless steel interior with keg racks.
  • 1-inch stainless steel finished top, galvanized steel back, and front venting.
  • Holds up to 5 sixth-barrel kegs and is draft beverage compatible.
  • Listed to NSF Standard 7 for open food storage; ETL Verified and ETL-Sanitation listed.

Overall Dimensions:

36.0"W x 24.13"D x 36.0"H

Product Weight:

302.0 lb

One-Zone Cooling

Single refrigeration zone for consistent temperature control across the cabinet.

Side-Serviced, Bar Profile Design

Built for bar installations with service access from the side and a low-profile cabinet shape.

Self-Contained Refrigeration

Integrated refrigeration system simplifies installation without remote cooling equipment.

Bright White LED Interior Lighting

Improves visibility inside the cabinet for easier loading and service.

Stainless Steel Interior with Keg Racks

Durable interior construction designed for draft beverage storage and keg support.

1-Inch Stainless Steel Finished Top

Provides a durable work surface that matches commercial bar environments.

Galvanized Steel Back

Adds cabinet durability with a rugged rear panel construction.

R290 Hydrocarbon Refrigerant

Uses R290 refrigerant for efficient, modern refrigeration performance.

Front Venting

Supports installation where rear ventilation clearance is limited.

Automatic Condensate Evaporator

Helps eliminate the need for a drain connection in standard installations.

Heated Mullion

Helps minimize condensation between cabinet sections.

Draft Beverage Compatible

Can be configured for direct draw draft beverage dispensing.

Type Draft Dispensing Cooler
Style One Zone, Side Serviced, Bar Profile
Compartments 2
Capacity 5 1/6-Barrel Kegs
Door Opening 12 Inches
Temperature Range 34°F to 65°F
Material Stainless Steel
Interior Finish Stainless Steel
Refrigeration Type Self-Contained
Refrigerant Type R290
Compressor Horsepower 1/8 HP
Voltage 120 Volts
Amps 2.75 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 8 Feet
Breaker Size 15 Amps
Country of Origin USA
Shipping Width 36 Inches
Shipping Depth 25 Inches
Shipping Height 36 Inches
Shipping Weight 302 Pounds
Selling Unit Each
Units Per Case 1

Frequently Asked Questions

No. It uses an automatic condensate evaporator, so a drain connection is not required under standard conditions.
It requires 120 Volts, 1-Phase, 60 Hz power on a dedicated 15 Amp circuit and uses a NEMA 5-15P plug.
It uses R290 hydrocarbon refrigerant.
The C1SB36 configuration holds up to 5 sixth-barrel kegs.
Yes. It is draft beverage compatible and can be configured for direct draw draft beverage dispensing.
It is listed as cETLus, ETL, ETL-Sanitation, and ETL Verified, and it conforms to NSF Standard 7 for open food storage.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.