Glastender, Inc.

Glastender One-Zone Front-Serviced Bar Profile Draft Dispensing Cooler, 84 Inch, 3-Section, 20-Inch Door Opening

SKU: C1FB84-DD
$6,682.50
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?
(888) 307-5030
Chat
Bulk pricing available

Related Searches

Back Bar Coolers Back Bar Coolers Bar Equipment Bar Refrigeration Best Sellers Commercial Beer Dispensers Commercial Refrigeration Commercial Refrigerators Glastender, Inc. New Arrivals Restaurant Equipment

Glastender One-Zone Front-Serviced Bar Profile Draft Dispensing Cooler, 84 Inch, 3-Section, 20-Inch Door Opening

Undercounter, Self-Contained, Bright White LED Lighting, Stainless Steel Interior

Built for draft service behind the bar, this 84-inch cooler combines keg-ready storage, front access, and self-contained R290 refrigeration in a compact bar-profile footprint.

  • 84-inch, three-section bar profile cooler with a 20-inch door opening for draft service.
  • Holds up to 4 half-barrel kegs and 14 sixth-barrel kegs.
  • Self-contained 1/4 HP refrigeration uses R290 refrigerant and a standard 120V, 15A electrical hookup.
  • Bright white LED lighting, locking doors, and a heated mullion improve daily operation.
  • Stainless steel interior with keg racks and a 1-inch finished stainless top are built for bar environments.
  • Automatic condensate evaporator eliminates the need for a drain connection in standard installations.

Overall Dimensions:

84.0"W x 24.13"D x 36.0"H

Product Weight:

475.0 lb

Draft Beverage Ready

Configured for direct draw draft service with keg rack storage inside the cabinet.

Front-Service, Front-Vent Design

Front access and front venting help simplify installation and maintenance behind the bar.

Self-Contained Refrigeration

Built-in refrigeration with R290 refrigerant and a 1/4 HP compressor keeps the system compact and easy to install.

Bright White LED Interior Lighting

7,000K lighting improves visibility inside the cabinet.

Stainless Steel Interior

Durable stainless interior surfaces are suited to beverage storage and bar service.

Heated Mullion

Helps minimize condensation between sections.

Stainless Steel Finished Top

The 1-inch stainless top adds durability for high-traffic bar use.

Automatic Condensate Evaporator

Standard no-drain operation under normal conditions.

Locking Doors

Helps secure stored product after hours.

Galvanized Steel Back

Provides a durable rear cabinet finish.

Type Draft Dispensing Cooler
Style Bar Profile
Installation Type Undercounter
Compartments 3
Capacity 4 1/2-Barrel Kegs
Refrigeration Type Self-Contained
Refrigerant Type R290
BTU 2200 BTUH
Voltage 120 Volts
Amps 7 Amps
Hertz 60 Hz
Phase 1-Phase
Breaker Size 15 Amps
Cord Length 8 Feet
Plug Type NEMA 5-15P
Water Connection Not Required
Drain Connection Not Required
Interior Finish Stainless Steel
Material Stainless Steel
Country of Origin USA
Selling Unit Each
Units Per Case 1
Shipping Width 84 Inches
Shipping Depth 25 Inches
Shipping Height 36 Inches
Shipping Weight 475 lb.

Certifications & Compliance

Certified badge of ETL Listed
ETL Listed

Documents

PDF Cutsheet PDF Download PDF Warranty sheet PDF Download PDF Warranty sheet PDF Download

Frequently Asked Questions

It holds up to 4 half-barrel kegs or 14 sixth-barrel kegs, depending on the configuration.
No. The unit uses an automatic condensate evaporator, so a drain connection is not required under standard conditions.
It requires 120V, 1-phase, 60 Hz power with a dedicated 15 amp circuit and a NEMA 5-15P plug.
Yes. The bar profile cooler can be configured for direct draw draft beverage dispensing.
It uses R290 refrigerant.
The published operating range is 34°F to 65°F, with beverage-specific temperature ranges listed in the documentation.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.

Talk to a Specialist
or call (888) 307-5030