Key specifications
- Product type
- Air-cooled remote condenser
- Compatible evaporator unit
- D2112R
- Refrigerant
- R449a
- Factory refrigerant charge
- 11 lb, pre-charged
- Electrical service
- 208-230 V / 60 Hz / 1 ph
- Operating power
- 2.53 kW
Follett C2112CU Air-cooled, single phase remote condenser for use with D2112R evaporator unit. Pre-charged, R449a
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Follett C2112CU is an air-cooled, single-phase remote condenser for use with the D2112R evaporator unit. It is factory pre-charged with R449a and operates on 208-230 V, 60 Hz, single-phase power.
- Refrigerant: 11 lb of pre-charged R449a
- Operating power: 2.53 kW
- Dimensions: 40 in W x 34 in D x 36.5 in H
- Electrical protection: 23 A minimum circuit ampacity and 35 A maximum HVACR breaker size
- Certifications: NSF, ETL and cUL Energy Verified
Overall Dimensions:
40.0"W x 34.0"D x 36.5"HProduct Weight:
285.0 lbAir-cooled remote condenser
The C2112CU is an air-cooled remote condenser for the D2112R evaporator unit.
D2112R compatibility
The model is specified for use with the D2112R evaporator unit.
Pre-charged R449a refrigerant
The unit is pre-charged at the factory with 11 lb of R449a.
Single-phase electrical service
Electrical service is 208-230 V, 60 Hz, single phase.
Refrigeration line limits
The maximum refrigerant line run is 75 ft (22.9 m), with a maximum line rise above the evaporator of 35 ft (10.7 m). The evaporator may be mounted up to 15 ft (4.6 m) above the condenser, and the maximum line drop without an oil trap is 15 ft (4.6 m).
Outdoor operating range
The specified outdoor condensing unit operating limits are -20°F to 120°F (-29°C to 49°C) ambient air temperature.
Electrical circuit requirements
The unit has a 23 A minimum circuit ampacity and a 35 A maximum HVACR breaker size.
Physical dimensions
The condenser measures 40 in wide, 34 in deep and 36.5 in high.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.