Key specifications
- Product type
- Air-cooled, single-phase remote condenser
- Compatible evaporator unit
- D1812R
- Electrical
- 208-230/60/1
- Operating power
- 2.16 kW
- Minimum circuit ampacity
- 20 A
- Maximum circuit HVACR breaker size
- 30 A
Spec sheet
Follett C1812CU Air-cooled, single phase remote condenser for use with D1812R evaporator unit. Pre-charged, R449a
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Follett C1812CU is an air-cooled, single-phase remote condenser for use with the D1812R evaporator unit.
- Factory pre-charged with 11 lb of R449a refrigerant.
- Electrical specification: 208-230/60/1.
- Specified for outdoor condensing unit air temperatures from -20°F to 120°F (-29°C to 49°C).
Overall Dimensions:
40.0"W x 34.0"D x 36.5"HProduct Weight:
285.0 lbAir-cooled remote condenser
Designed as an air-cooled remote condenser for a remote ice machine installation.
D1812R compatibility
Specified for use with the D1812R evaporator unit.
Factory pre-charged
Factory pre-charged with 11 lb of R449a refrigerant.
Single-phase electrical service
Uses 208-230/60/1 electrical service.
Refrigerant line range
The specified maximum refrigerant line run length is 75 ft (22.9 m), with a maximum line rise above the evaporator of 35 ft (10.7 m).
Operating limits
Outdoor condensing unit operating limits are -20°F to 120°F (-29°C to 49°C) air temperature.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.