Key specifications
- Product type
- Air-cooled remote condenser
- Compatible evaporator
- D1012R
- Electrical
- 208–230 V/60 Hz/1 ph
- Refrigerant
- R449a
- Factory refrigerant charge
- 8 lb, pre-charged at factory
- Operating power
- 1.30 kW
Follett C1012CU Air-cooled, single phase remote condenser for use with D1012R evaporator unit. Pre-charged, R449a
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
C1012CU is an air-cooled, single-phase remote condenser for use with the Follett D1012R evaporator unit. It is factory pre-charged with R449a and uses 208–230 V, 60 Hz, single-phase electrical service.
- Operating power: 1.30 kW
- Maximum refrigerant line run: 75 ft (22.9 m)
- Factory refrigerant charge: 8 lb of R449a
Overall Dimensions:
40.0"W x 34.0"D x 25.25"HProduct Weight:
280.0 lbAir-cooled remote condenser
Provides air-cooled remote condensing for the D1012R evaporator unit.
Single-phase electrical service
Specified for 208–230 V, 60 Hz, single-phase operation.
Factory-precharged refrigerant system
Pre-charged at the factory with 8 lb of R449a.
Remote installation range
Supports a maximum refrigerant line run of 75 ft (22.9 m).
Outdoor operating limits
Specified operating air temperature range is -20 to 120 °F (-29 to 49 °C).
Installation elevation limits
The maximum line rise above the evaporator is 35 ft (10.7 m), and the evaporator may be mounted up to 15 ft (4.6 m) above the condenser.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.