Everpure

Everpure WS-30E Single-Tank Water Conditioner, 30,000-Grain Capacity, 10 GPM, 230 VAC

SKU: EV998059
$2,129.09
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Everpure WS-30E Single-Tank Water Conditioner, 30,000-Grain Capacity, 10 GPM, 230 VAC

Floor Model with 3/4 Inch FNPT Inlet/Outlet and Meter-Initiated Control Valve

A compact commercial water conditioner that removes hardness at up to 10 GPM while helping reduce salt and water consumption.

  • Single-tank WS-30E system designed for commercial water conditioning applications.
  • Removes up to 30,000 grains of hardness with continuous flow up to 10 GPM.
  • Meter-initiated Fleck 5600-SXT control helps minimize salt and water usage.
  • Five-cycle control manages backwash, brining, slow rinse, rapid rinse, refill, and service.
  • Fiberglass-reinforced resin vessel with polyethylene liner helps resist corrosion.
  • 3/4 Inch FNPT inlet and outlet connections with a 1/2 Inch FNPT drain line connection.

Overall Dimensions:

12.75"W x 23.0"D x 44.5"H

Product Weight:

90.0 lb

Single-Tank Design

Simplifies installation and saves space with one conditioning tank.

Single-Tank Design

30,000-Grain Hardness Removal

Provides hardness removal capacity of 30,000 grains per tank at 15 lbs. of salt per cubic foot.

10 GPM Continuous Flow

Supports continuous service flow up to 10 gallons per minute at 15 psi pressure drop.

Meter-Initiated Control Valve

The Fleck 5600-SXT valve monitors water usage to help reduce salt and water consumption.

Five-Cycle Regeneration

Includes controlled upflow backwash, downflow brining and slow rinse, rapid rinse, timed brine refill, and downflow service.

Corrosion-Resistant Vessel

Fiberglass-reinforced resin vessel with NSF-approved polyethylene liner helps protect against corrosion and improve performance.

Large Brine Tank

Large-capacity brine tank helps extend the time between salt replenishments.

Type Water Conditioner
Style Single Tank
Installation Type Floor Model
Capacity 30,000 Grains
Resin Volume 1 Cubic Foot
Flow Rate 10 GPM Continuous
Operating Pressure 25 to 125 PSI
Temperature Range 35 to 100 °F (2 to 38 °C)
Voltage 230 VAC
Hertz 50 Hz
Plug Type CEE 7/16 Schuko
Water Inlet Size 3/4 Inch FNPT
Water Outlet Size 3/4 Inch FNPT
Drain Connection Size 1/2 Inch FNPT
Material Fiberglass-Reinforced Resin
Operating Weight 550 Pounds
Selling Unit Each
Units Per Case 1

Frequently Asked Questions

It removes up to 30,000 grains of hardness per tank at 15 lbs. of salt per cubic foot.
The WS-30E supports continuous flow up to 10 GPM at 15 psi pressure drop.
It uses 3/4 Inch FNPT inlet and outlet connections and a 1/2 Inch FNPT drain line connection.
It is listed for cold water fed warewashing, laundry, boiler scale control, water heater scale protection/reduction, reverse osmosis pretreatment, espresso, and general housekeeping.
The WS-30E series is shown in 120 VAC 50/60 Hz and 230 VAC 50 Hz versions; this model is the 230 VAC version.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.