Everest Refrigeration

Everest Refrigeration Two-Section Direct Draw Keg Refrigerator with 2 Draft Towers, 68-Inch Wide, 20 Cu. Ft., 3 Half-Barrel Keg Capacity

SKU: EBD3-24
GTIN: 00810139400431
$3,773.00
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Everest Refrigeration Two-Section Direct Draw Keg Refrigerator with 2 Draft Towers, 68-Inch Wide, 20 Cu. Ft., 3 Half-Barrel Keg Capacity

Self-Contained R290 Refrigeration, Black Vinyl Exterior, Stainless Steel Countertop

Keep three full-size kegs cold and pour-ready with a self-contained direct-draw beer dispenser built for efficient, low-maintenance service.

  • Two-section direct-draw keg refrigerator with 20 cu. ft. of cold storage.
  • Holds 3 half-barrel kegs and includes 2 insulated 3" draft towers.
  • Self-contained, side-mounted R290 refrigeration with auto defrost for efficient operation.
  • Digital temperature control with LED display and a 35°F factory preset.
  • Stainless steel countertop, galvanized steel interior, and textured black vinyl exterior.
  • Locking solid doors, LED interior lighting, and an exterior drain port for excess moisture.

Overall Dimensions:

68.0"W x 24.5"D x 52.38"H

Product Weight:

299.0 lb

Self-Contained Side-Mounted Refrigeration

Side-mounted, fully detachable condensing unit supports efficient cooling and easier service access.

R290 Hydrocarbon Refrigerant

Uses environmentally friendly R290 refrigerant for modern, efficient performance.

Digital Temperature Control

Multi-function controller with LED display; factory preset to 35°F and adjustable from 33°F to 54°F.

Auto Defrost Cycle

Time-initiated, temperature-terminated auto defrost helps maintain smooth, low-maintenance operation.

Draft Tower Setup

Includes two 3" diameter insulated stainless steel draft towers with matching air distributors, plus one single-faucet and one dual-faucet setup.

Durable Cabinet Construction

Features a stainless steel countertop, galvanized steel interior walls, stainless steel floor, and textured laminated black vinyl exterior.

LED Interior Lighting

Shatter-proof LED lighting provides bright illumination with low heat output.

Locking Solid Doors

Two hinged solid doors include recessed handles, snap-in magnetic gaskets, and pre-installed locks.

Drain Management

Exterior drain port routes excess top-tray moisture; drain hose is not included and a floor drain is required.

Insulated Cabinet

1 3/4" polyurethane insulation helps retain cold air and support efficient operation.

Type Beer Dispenser
Style Direct Draw
Compartments 2
Capacity 20 Cubic Feet
Keg Capacity 3 Half-Barrel Kegs
Draft Towers 2
Faucets 3
Refrigeration Type Self-Contained
Refrigerant Type R290 Hydrocarbon
BTU 1,926 BTU/HR
Material Stainless Steel
Interior Finish Galvanized Steel
Finish Textured Black Vinyl
Installation Type Floor Model
Voltage 115 Volts
Amps 3.5 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 9 Feet
Selling Unit Each
Units Per Case 1
Shipping Width 68 Inches
Shipping Depth 25 Inches
Shipping Height 53 Inches
Shipping Weight 299 lb.

Certifications & Compliance

Certified badge of ETL Listed
ETL Listed
Certified badge of NSF Certified
NSF Certified

Warranty & Protection

3 Years Parts & Labor / 5 Years Electrical / 10 Years Compressor

Frequently Asked Questions

It holds 3 half-barrel kegs.
It uses a side-mounted, self-contained refrigeration system with an R290 condensing unit.
The unit requires 115V / 60Hz / 1-phase power, draws 3.5 amps, and comes with a NEMA 5-15P plug and 9-foot cord.
The controller is factory preset to 35°F and can be adjusted from 33°F to 54°F.
Yes. A floor drain is required, and the drain hose is not included.
The cutsheet lists a 3-year parts and labor warranty, 5-year electrical warranty, and 10-year compressor warranty.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.