Electrolux Professional 9R011B Reverse Osmosis Water Filtration System, 500 GPD

SKU: 9R011B
$1,843.16

Want to speak to an expert?

The Electrolux Professional 9R011B reverse osmosis water system is designed for foodservice applications and produces approximately 500 gallons of product water per day. Its treatment process includes a 5-micron sediment pre-filter, activated catalytic carbon filtration, and reverse osmosis membranes.

  • Mineral blending for foodservice applications including specialty coffee brewers, espresso machines, steamers, combi ovens, small ice machines, and craft brewing.
  • Permeate pump, dual TDS monitor, flow monitor, three pressure gauges, and a manual bypass valve.
  • Quick-connect fittings with 1/2-inch inlet, 1/2-inch outlet, and 1/4-inch drain connections.

Product Weight:

26.31 lb

Mechanical sediment filtration

USA-made 5-micron nominal sediment pre-filter reduces dirt, silt, rust, and other sediment.

Activated catalytic carbon filtration

USA-made catalytic carbon filter reduces chloramine, chlorine, and several other organic chemicals.

Reverse osmosis membrane

The approximately 500 GPD membrane is designed to reduce dissolved mineral content, with typical rejection greater than 90%.

Mineral blending

Mineral blending supports foodservice applications including specialty coffee brewers, espresso machines, steamers, combi ovens, small ice machines, and craft brewing.

Permeate pump

The permeate pump supports system efficiency and production rate.

Dual TDS monitoring

Dual TDS monitoring helps monitor product water quality.

Flow monitoring

A flow monitor helps indicate when filters need to be changed.

Pressure monitoring

Three pressure gauges support system monitoring and troubleshooting.

Manual bypass valve

The manual bypass valve allows connected equipment to run in the event of a system failure.

Quick-connect fittings

John Guest quick-connect fittings provide a 1/2-inch inlet, 1/2-inch outlet, and 1/4-inch drain connection.

Manufacturer Electrolux Professional
Product Type Reverse osmosis water system
Daily Production 500 gpd
Sediment Prefilter Rating 5 micron nominal
Reverse Osmosis Membrane Rejection Typically greater than 90%
Inlet Water Temperature 85°F maximum
Inlet Pressure 40–80 PSI
Incoming TDS Less than 1,000 ppm
Water Hardness Less than 2 GPG
Iron, Manganese and H2S Less than 0.01 ppm
Inlet Connection 1/2 inch quick-connect
Outlet Connection 1/2 inch quick-connect
Drain Connection 1/4 inch quick-connect

Warranty & Protection

1-year labor and 1-year parts warranty for Reverse Osmosis equipment.

Frequently Asked Questions

The system produces approximately 500 gallons of reverse osmosis water per day.
It uses a 5-micron nominal sediment pre-filter, activated catalytic carbon filtration, and reverse osmosis membranes.
The documented requirements are a maximum inlet water temperature of 85°F, inlet pressure of 40–80 PSI, incoming TDS below 1,000 ppm, hardness below 2 GPG, and iron, manganese, and H2S below 0.01 ppm.
The system has 1/2-inch quick-connect inlet and outlet fittings and a 1/4-inch quick-connect drain fitting.
The external dimensions are 26 inches wide, 7 inches deep, and 25 inches high.
Yes. It includes dual TDS monitoring, a flow monitor, and three pressure gauges.
The warranty sheet lists 1 year of labor coverage and 1 year of parts coverage for Reverse Osmosis equipment.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.