Eagle Group -WH Tankless Hand Sink Water Heater, 0.5 GPM, 48°F Temperature Rise, 120V

SKU: -WH
$1,837.68

Want to speak to an expert?

The Eagle Group -WH is a self-contained, tankless Eemax hot water heater for Eagle hand sinks with a 10" x 14" x 6" rounded sink bowl.

It delivers 0.5 gallons per minute with a 48°F temperature rise. A flow switch activates the heater only on demand. The unit operates at 120V and 29A, includes 3/8" compression fittings and a type 304 stainless steel pedestal base with a front access panel, and requires field wiring.

Tankless on-demand heating

A flow switch activates the heater only on demand, with no standby heat loss stated in the specification sheet.

Hand sink compatibility

For Eagle hand sinks with a 10" x 14" x 6" rounded sink bowl.

Type 304 stainless steel base

Includes a pedestal base with a front access panel and a notch for water heater electrical wiring.

Compression connections

Uses 3/8" compression fittings.

Operating pressure range

Specified for 25 PSI minimum and 150 PSI maximum operating pressure.

T&P relief valve

The specification sheet states that no T&P relief valve is needed; check local codes.

Installation wiring

Field wiring is required.

Heater type Self-contained tankless hot water heater
Heater brand Eemax
Application Eagle hand sinks with 10" x 14" x 6" rounded sink bowl
Flow rate 0.5 gallons per minute
Temperature rise 48°F
Voltage 120 V
Current 29 A
Frequency / phase 60 Hz / 1 ph
Fittings 3/8" compression
Pedestal base material Type 304 stainless steel
Minimum operating pressure 25 PSI
Maximum operating pressure 150 PSI
Wiring Field wiring required

Warranty & Protection

One-year limited warranty from the date of original installation, not to exceed 18 months from the date of shipment.

Frequently Asked Questions

It is designed for Eagle hand sinks with a 10" x 14" x 6" rounded sink bowl.
The heater provides 0.5 gallons per minute with a 48°F temperature rise.
Yes. A flow switch activates the heater only on demand.
It is rated for 120V, 29A, 60 Hz, single-phase operation, and field wiring is required.
It uses 3/8" compression fittings.
Yes. The unit includes a type 304 stainless steel pedestal base with a front access panel.
The specification sheet lists 25 PSI minimum and 150 PSI maximum operating pressure.
The specification sheet states that no T&P relief valve is needed, but local codes should be checked.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.