Key specifications
- Amps
- 15.8 Amps
- Phase
- 1-Phase
- Dimensions
- 66.0"W × 32.25"D × 34.0"H
- Type
- Hot Food Table
- Style
- Portable Open Base
- Installation Type
- Floor Model
Spec sheet
Eagle Group SPHT4-240 4-Pan Sealed-Well Steam Table
- 120 V · 1-phase · 25 A
- 208 V · 1-phase · 13.7 A
- 240 V · 1-phase · 15.8 A
- 240 V · 3-phase · 10.5 A
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Eagle Group SPHT4-240 is a portable electric hot food table with an open base and four 12 in x 20 in stainless steel sealed wells.
It supports wet or dry operation with individual infinite controls, four 3/4 in drains, and a drain manifold with valve. The highly polished 430 stainless steel top and body include a removable polyethylene cutting board, stainless steel dish shelf, adjustable stainless steel undershelf, push bar, and swivel casters.
This floor-model unit operates at 240 Volts, 3.8 kW, 15.8 Amps, 60 Hz, 1-Phase, with a NEMA 6-20P plug.
Overall Dimensions:
66.0"W x 32.25"D x 34.0"HProduct Weight:
227.0 lbSealed Wells
Four 12 in x 20 in stainless steel sealed wells support wet or dry operation.
Individual Controls
Each well has an individual infinite control.
Drainage
Four 3/4 in drains connect to a drain manifold with valve.
Open Base
The open base includes an adjustable stainless steel undershelf and stainless steel dish shelf.
Stainless Steel Construction
The top and body are made from highly polished 430 stainless steel.
Mobility
The portable unit has 4 in swivel casters and an attached push bar.
Included Cutting Board
A removable polyethylene cutting board is included.
Electrical Configuration
Operates at 240 Volts, 3.8 kW, 15.8 Amps, 60 Hz, 1-Phase, with a NEMA 6-20P plug.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.