Key specifications
- Amps
- 7.9 Amps
- Phase
- 1-Phase
- Dimensions
- 35.5"W × 32.25"D × 34.0"H
- Type
- Hot Food Table
- Style
- Portable
- Installation Type
- Floor Model
Spec sheet
Eagle Group SPHT2-240 Portable 2-Pan Sealed Well Steam Table
- 120 V · 1-phase · 12.5 A
- 208 V · 1-phase · 6.9 A
- 208 V · 3-phase · 6 A
- 240 V · 1-phase · 7.9 A
- 240 V · 3-phase · 6.9 A
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Eagle Group SPHT2-240 is a portable sealed-well hot food table with an open shelf base and two 12 in x 20 in stainless steel wells for wet or dry operation.
- Individual infinite controls provide separate control for each well.
- The unit includes a removable 8 in polyethylene cutting board, stainless steel dish shelf, and adjustable stainless steel undershelf.
- A 240V, 60 Hz, single-phase electrical configuration uses 7.9 amps and a NEMA 6-15P plug.
- The top and body are highly polished 430 stainless steel.
Overall Dimensions:
35.5"W x 32.25"D x 34.0"HProduct Weight:
101.0 lbSealed Wells
Two 12 in x 20 in stainless steel sealed wells are provided.
Wet or Dry Operation
The wells support wet or dry operation.
Individual Infinite Controls
Each well has an individual infinite control.
Open Shelf Base
The open base includes a stainless steel dish shelf and adjustable stainless steel undershelf.
Portable Mobility
The portable unit has 4 in swivel casters and a push bar attached to the end panel.
Drain Manifold
Each well has a 3/4 in drain connected to a common manifold with valve.
Included Cutting Board
A removable 8 in polyethylene cutting board is included.
Stainless Steel Construction
The top and body are highly polished 430 stainless steel, and the heat compartments are 304 stainless steel.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.