Key specifications
- Amps
- 6.3 Amps
- Phase
- 1-Phase
- Dimensions
- 35.75"W × 30.5"D × 34.0"H
- Type
- Hot Food Table
- Style
- Enclosed Base
- Installation Type
- Floor Model
Eagle Group Spec-Master PHT2CB-240 2-Pan Hot Food Table
- 2
- 3
- Enclosed Base with Sliding Doors
- Partially Enclosed Base
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Spec-Master PHT2CB-240 is a portable electric hot food table with two 12 x 20-inch wells and an enclosed stainless steel base.
Individual thermostatic controls are located in a recessed panel, with a master toggle switch and indicator light. The table has a 430 stainless steel top and body, sliding stainless steel doors, a polyethylene cutting board, a push bar, and a full-perimeter bumper.
Four 5-inch swivel plate casters, including two with brakes, support mobile operation. Electrical specifications are 1.5 kW, 240 volts, single phase, 6.3 amps, with a NEMA 6-15P plug.
Overall Dimensions:
35.75"W x 30.5"D x 34.0"HProduct Weight:
200.0 lbTwo Hot Food Wells
Two 12 x 20-inch wells are 8 inches deep and specified for wet or dry operation.
Thermostatic Controls
Individual thermostatic controls are located in a recessed panel.
Enclosed Base
The stainless steel enclosed base has 22-gauge stainless steel sliding doors with recessed handles.
Stainless Steel Construction
The top and body are constructed from 430 stainless steel.
Polyethylene Cutting Board
An 8-inch-wide by 1/2-inch-thick polyethylene cutting board is furnished.
Mobile Design
The unit has a push bar, full-perimeter bumper, and four 5-inch swivel plate casters, including two with brakes.
Electrical Controls
A master toggle switch with indicator light controls the unit.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.