Key specifications
- Amps
- 5.7 Amps
- Phase
- 1-Phase
- Dimensions
- 64.13"W × 31.5"D × 40.0"H
- Type
- Worktop Freezer
- Style
- Drawer
- Installation Type
- Floor Model
Delfield STD4564NP Two-Section Worktop Freezer, 4 Drawers
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Delfield STD4564NP is a two-section worktop freezer with four drawers, a stainless steel exterior, a plastic interior, and a 4-inch backsplash.
It provides a 0°F to 5°F temperature range, 19.68 cu. ft. of storage volume, self-contained rear-mounted refrigeration, and R290 refrigerant. The unit is mounted on 5-inch casters and connects to 115-volt, single-phase power through a NEMA 5-15P plug.
Overall Dimensions:
64.13"W x 31.5"D x 40.0"HProduct Weight:
522.0 lbFour Drawers
The exact model is configured with four drawers across two sections.
Drawer Pan Capacity
The cutsheet states that the top and bottom drawers each hold two full-size 12 × 20 in. pans; pans are supplied by others.
Stainless Steel Exterior
The exterior top, front, sides, and ends are stainless steel.
Plastic Interior
The interior uses plastic liners and interior sides with integral shelf supports.
4-Inch Backsplash
The STD configuration includes a full-width, 4-inch backsplash.
Refrigeration
The unit uses self-contained, rear-mounted refrigeration with R290 refrigerant.
Electronic Control
An ACT solid-state electronic control is mounted on the exterior rear of the cabinet.
5-Inch Casters
The unit is mounted on 5-inch casters with locking brakes on the front two casters.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.