Key specifications

Amps
5.2 Amps
Phase
1-Phase
Dimensions
48.13"W × 31.5"D × 40.0"H
Type
Worktop Freezer
Style
Drawers
Installation Type
Floor Model
Spec sheet
Delfield SKU: STD4548NP

Delfield STD4548NP 48-Inch 4-Drawer Worktop Freezer

$9,753.00
/each
Estimated to ship in 26–29 business days
Style
Layout
Back finish
Cutting board material
Front finish
Casters
Included: Delfield warranty Published documents list differing warranty terms: the cutsheet states three-year parts and labor coverage plus seven-year compressor parts coverage, while the warranty sheet states a standard one-year limited warranty

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $902/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Specifications

Type Worktop Freezer
Style Drawers
Installation Type Floor Model
Material Stainless Steel
Interior Finish Plastic
Size 2 Sections
Capacity 14.02 Cubic Feet
Drawer Count 4 Drawers
Backsplash Height 4 Inches
Caster Diameter 5 Inches
Refrigeration Type Self-Contained, Rear Mounted
Refrigerant Type R290
Temperature Range 0°F to 5°F
Controls ACT Electronic, Solid-State
Voltage 115 Volts
Amps 5.2 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 10 Feet
Horsepower 0.35 HP

Description

The Delfield STD4548NP is a two-section worktop freezer base with four drawers, a 4-inch full-width backsplash, and a stainless steel exterior with a plastic interior.

Its self-contained, rear-mounted R290 refrigeration system maintains 0°F to 5°F (-18°C to -21°C). The unit operates on 115 Volts, 60 Hz, single-phase power with 5.2 Amps and a NEMA 5-15P plug.

  • 48.13-inch width, 31.5-inch depth, and 40-inch height
  • 5-inch casters with front locking brakes
  • ACT electronic, solid-state control

Overall Dimensions:

48.13"W x 31.5"D x 40.0"H

Product Weight:

398.0 lb

Two-Section Configuration

The freezer base is configured with two sections.

Four Drawers

The exact model is specified with four drawers.

4-Inch Backsplash

The full-width backsplash is 4 inches tall.

Self-Contained Refrigeration

The refrigeration system is self-contained and rear mounted.

R290 Refrigerant

The refrigeration system uses R290 hydrocarbon refrigerant.

Temperature Range

The cabinet maintains an interior temperature of 0°F to 5°F (-18°C to -21°C).

Stainless Steel Exterior

The exterior is stainless steel.

Plastic Interior

The interior finish is plastic.

5-Inch Casters

The unit is mounted on 5-inch casters with locking brakes on the front two casters.

ACT Control

An ACT electronic, solid-state control is mounted on the exterior rear of the cabinet.

Frequently Asked Questions

It has two sections and four drawers.
The cabinet maintains 0°F to 5°F (-18°C to -21°C).
It uses self-contained, rear-mounted R290 hydrocarbon refrigeration.
It requires 115 Volts, 60 Hz, single-phase power at 5.2 Amps and uses a NEMA 5-15P plug.
The product is 48.13 inches wide, 31.5 inches deep, and 40 inches high, with a listed weight of 398 pounds.
The cutsheet states that pans are supplied by others.

This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.

The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.

What to have ready on delivery day

  • Count every piece against the delivery receipt.
  • Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
  • Photograph the freight on the truck before it’s moved.
  • If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.

Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.

How to inspect and sign for freight

Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.

If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.

Reporting damage after delivery

Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030