Delfield

Delfield 32-Inch Wide One-Section Refrigerated Worktop Base with 2 Drawers and 4-Inch Backsplash

SKU: STD4432NP
$5,779.50
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Delfield 32-Inch Wide One-Section Refrigerated Worktop Base with 2 Drawers and 4-Inch Backsplash

Self-Contained, Rear-Mounted Refrigeration, 115V

A front-breathing refrigerated worktop base that puts cold storage at the line with 2 drawers, a 4-inch backsplash, and a self-contained rear-mounted system.

  • 32-inch, one-section refrigerated worktop base with 2 drawer access and a 4-inch backsplash.
  • Front-breathing design allows wall placement, cabinet integration, or installation in an existing lineup.
  • Rear-mounted self-contained R290 refrigeration maintains a 33°F to 41°F holding range.
  • Stainless steel exterior construction and ABS interior liners are built for daily commercial use.
  • Drawer storage is sized for full-size 12 x 20 pans supplied by others.
  • 5-inch casters with locking brakes help simplify setup and cleaning.

Overall Dimensions:

32.0"W x 31.5"D x 36.0"H

Product Weight:

345.0 lb

Front-Breathing Self-Contained Design

Can be placed against a wall or built into an existing lineup without side or rear breathing clearance.

Rear-Mounted R290 Refrigeration

Self-contained system with a rear-mounted condenser coil and hot gas condensate evaporator.

4-Inch Full-Width Backsplash

Helps contain spills and protect the wall behind the unit.

Two-Drawer Storage

Top drawer fits two full-size 12 x 20 x 4-6 inch pans; bottom drawer fits two full-size 12 x 20 x 4 inch pans. Pans are supplied by others.

Stainless Steel Exterior Construction

One-piece stainless steel top plus stainless steel front, sides, and drawer exteriors for durability.

ABS Interior Liners

Thermoformed ABS interior sides and liners resist dents, chips, and corrosion.

Solid-State Electronic Control

Exterior rear-mounted electronic control helps maintain precise temperatures under heavy-duty conditions.

Temperature Holding Range

Cabinet maintains 33°F to 41°F for refrigerated storage.

Foamed-In-Place Insulation

High-density polyurethane insulation helps reduce energy costs and improve temperature retention.

5-Inch Casters with Locking Brakes

Standard plate casters make the unit easier to position, install, and clean around.

Lifetime Drawer Track Warranty

Drawer track assembly is backed by a lifetime warranty.

Type Flat Top Refrigerated Base
Style Drawer
Installation Type Floor Model (With Casters)
Compartments 1
Pan Capacity 2 Full-Size Pans Per Drawer
Pan Size 12 Inches x 20 Inches
Controls Solid State Electronic
Temperature Range 33°F to 41°F
Refrigeration Type Self-Contained
Refrigerant Type R290
Material Stainless Steel
Finish Stainless Steel
Interior Finish ABS Plastic
Capacity 9.01 Cubic Feet
Voltage 115 Volts
Amps 4.8 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 10 Feet
Shipping Width 32 Inches
Shipping Depth 32 Inches
Shipping Height 36 Inches
Shipping Weight 345 lb.
Selling Unit Each
Units Per Case 1

Warranty & Protection

3-year parts and labor; 7-year compressor parts

Frequently Asked Questions

No. It is 100% front-breathing, so it can be installed against a wall or built into a cabinet or existing lineup.
The top drawer holds two full-size 12 x 20 x 4-6 inch pans, and the bottom drawer holds two full-size 12 x 20 x 4 inch pans. Pans are supplied by others.
It requires 115 volts, 60 Hz, single-phase power, draws 4.8 amps, and comes with a 10-foot cord and NEMA 5-15P plug.
The cabinet maintains an internal temperature range of 33°F to 41°F.
Yes. The STD model includes a full-width 4-inch backsplash.
The cutsheet lists a 3-year parts and labor warranty and a 7-year compressor parts warranty.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.