Delfield

Delfield STD4427NP-6 Single-Section Sandwich/Salad Top Refrigerator with Drawers, 27-Inch Wide, 6-Pan Capacity

SKU: STD4427NP-6
$6,047.50
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Delfield STD4427NP-6 Single-Section Sandwich/Salad Top Refrigerator with Drawers, 27-Inch Wide, 6-Pan Capacity

Front-breathing, self-contained refrigeration with stainless steel top, 4-inch backsplash, and cutting board

Compact, front-breathing prep refrigeration with six-pan capacity, two drawers, and a stainless steel work surface keeps ingredients organized and within reach.

  • 27-inch-wide single-section salad top refrigerator with 8.2 cubic feet of refrigerated storage.
  • Six 1/6-size pan capacity with two drawers for organized ingredient access.
  • Front-breathing, self-contained design can be placed against a wall or built into a lineup.
  • Stainless steel top, front, and sides with a 4-inch backsplash and included polyethylene cutting board.
  • R290 refrigerant, ABS interior sides, and solid-state electronic controls support efficient cold holding.
  • Mounted on 5-inch casters with front locking casters for mobility and stability.

Overall Dimensions:

27.13"W x 31.5"D x 42.12"H

Product Weight:

240.0 lb

Front-Breathing Design

100% front-breathing construction allows the unit to be installed against a wall or built into a cabinet or lineup without rear clearance.

Stainless Steel Prep Surface

Durable stainless steel top, front, and sides provide a sanitary, easy-to-clean exterior, and ST models include a 4-inch stainless steel backsplash.

Included Pan Rail and Cutting Board

Supplied with six 1/6-size plastic pans, positive placement adapter bars, and a 27-inch by 10-inch polyethylene cutting board.

Drawer Storage System

Two drawers provide lower storage, with heavy-duty stainless steel drawer frames and slides designed for commercial use.

Durable Interior And Insulation

Thermoformed ABS interior sides resist dents, chips, and corrosion, while foamed-in-place polyurethane insulation helps maintain temperature efficiency.

Self-Contained Refrigeration

Rear-mounted refrigeration system uses environmentally friendly R290 refrigerant and a 0.3 hp compressor for cold-holding performance.

Solid-State Electronic Control

ACT solid-state electronic controls help maintain precise cabinet temperatures in demanding prep environments.

Mobility And Power

Mounted on 5-inch plate casters with front locking casters and supplied with a 10-foot cord and NEMA 5-15P plug.

Type Sandwich/Salad Top Refrigerator
Style Drawer
Installation Type Floor Model
Sections 1
Drawers 2
Pan Capacity 6
Pan Size 1/6 Size
Capacity 8.2 Cubic Feet
Material Stainless Steel
Interior Finish ABS Plastic
Finish Stainless Steel
Compressor Style Front Breathing
Refrigeration Type Self-Contained
Refrigerant Type R290 Hydrocarbon
Controls Solid State Electronic
Voltage 115 Volts
Amps 4 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 10 Feet
Shipping Width 28 Inches
Shipping Depth 32 Inches
Shipping Height 43 Inches
Shipping Weight 240 Pounds
Selling Unit Each
Units Per Case 1

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified
Certified badge of UL Certified
UL Certified

Frequently Asked Questions

The STD4427NP-6 is a six 1/6-size pan capacity model.
No. Its front-breathing design allows it to be installed against a wall or built into a lineup, but airflow under the unit must not be restricted.
It operates on 115 Volts, 60 Hz, single-phase power, draws 4 amps, and comes with a 10-foot cord and NEMA 5-15P plug.
This model uses R290 hydrocarbon refrigerant.
The unit includes a 27-inch by 10-inch polyethylene cutting board, six 1/6-size plastic pans, and positive placement adapter bars.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.