Key specifications
- Amps
- 6.3 Amps
- Phase
- 1-Phase
- Dimensions
- 114.0"W × 31.5"D × 36.0"H
- Type
- Refrigerated Work Table
- Installation Type
- Floor Model
- Material
- Stainless Steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Delfield 186114BUCMP is a three-section refrigerated work table with a 114-inch width, 37.24 cu. ft. capacity, and three 32-inch doors.
- Stainless steel top, front, and ends
- Self-contained, side-mounted refrigeration system using R290 Hydrocarbon refrigerant
- Electronic temperature control with a 36°F to 40°F interior cabinet range
- Interior ends and door frames made from thermoformed ABS plastic
- Mounted on 6-inch casters
The unit operates at 115 volts, 60 Hz, single phase, and 6.3 amps with a NEMA 5-15P plug and 8-foot cord.
Overall Dimensions:
114.0"W x 31.5"D x 36.0"HProduct Weight:
685.0 lbThree-Section Storage
Three 32-inch doors provide access to the three sections.
Stainless Steel Construction
The top, front, and ends are stainless steel.
Self-Contained Refrigeration
The side-mounted refrigeration system uses R290 Hydrocarbon refrigerant.
Electronic Temperature Control
Electronic control supports an interior cabinet temperature range of 36°F to 40°F.
Caster-Mounted Base
The unit is mounted on 6-inch casters.
Wire Shelves
Each interior door section has one removable epoxy-coated wire shelf.
Electrical Connection
Operates at 115 volts, 60 Hz, single phase, and 6.3 amps with a NEMA 5-15P plug and 8-foot cord.
ABS Interior Components
Interior ends and door frames are thermoformed ABS plastic.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.