Crown (Middleby) GL-30E Steam Kettles

Crown GL-30E 30-Gallon Gas Stationary Steam Kettle

Engineered for continuous, high-volume production, the Crown GL-30E delivers fast heat-up, accurate temperature control and rock-solid durability. Thirty gallons of 316 stainless steel cooking surface give chefs the corrosion-resistance they need for acidic foods, while a 304 stainless exterior, electronic ignition and built-in safety system keep your kitchen running smoothly shift after shift.

Performance & convenience

• 100,000 BTU stainless steel burners with electronic ignition – no standing pilot.
• 2/3 steam jacket surrounds the product zone for even, scorch-free heating from 165 °F to 275 °F (74 °C – 135 °C).
• Direct-immersion thermostat and cooking light provide precise, at-a-glance control.
• Spring-assisted hinged cover reduces operator fatigue and helps retain heat and moisture.
• 2" tangent draw-off valve with included perforated strainer for quick portioning and easy clean-out.
• Tri-leg base with 6" (152 mm) adjustable stainless feet for rock-steady installation on non-combustible floors.

Built-in safety & protection

• Low-water cut-off, low-water indicator light and water sight glass.
• Pressure gauge, pressure relief valve and pressure switch—factory-set for 50 psi (345 kPa) max.
• Automatic electronic ignition eliminates open flames when the kettle is not firing.
• CSA-Star, CSA-Flame and NSF certifications for gas, safety and sanitation compliance.

What’s in the box

• GL-30E stationary kettle (natural or LP gas, field convertible)
• Perforated draw-off strainer
• Spring-assisted stainless steel cover
• Integrated faucet bracket (filler faucets sold separately)
• 6' (1.8 m) cord & 120 V plug

Technical specifications

Intended for commercial use only. Install and operate according to local codes and the supplied Crown installation manual.