Key specifications
- BTU
- 1,030 BTU/h
- Amps
- 3.7 Amps
- Phase
- 1-Phase
- Dimensions
- 48.0"W × 32.0"D × 32.0"H
- Type
- Undercounter Freezer
- Installation Type
- Undercounter
Spec sheet
Continental Refrigerator UCF48NGD-B 48" 2-Section Undercounter Freezer, 9 cu. ft., 2 Hinged Glass Doors, Stainless Top
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Continental Refrigerator UCF48NGD-B is a 48-inch, two-section undercounter freezer with 9 cu. ft. of capacity and two hinged glass doors.
- Baked black enamel finish exterior with a stainless steel top and aluminum interior
- Front-breathing, rear-mounted self-contained refrigeration system
- Natural R-290 hydrocarbon refrigerant
- Four heavy-duty epoxy-coated steel shelves
- 115-volt electrical operation with a NEMA 5-15P plug and 10-foot cord
Overall Dimensions:
48.0"W x 32.0"D x 32.0"HProduct Weight:
248.0 lbGlass Doors
Two spring-loaded, self-closing hinged glass doors include cylinder locks and magnetic snap-in Santoprene door gaskets.
Front-Breathing Refrigeration
The performance-rated refrigeration system breathes from the front and is self-contained with rear-mounted refrigeration.
R-290 Refrigerant
Uses natural R-290 hydrocarbon refrigerant.
Cabinet Construction
The cabinet has a baked black enamel finish exterior, stainless steel top, aluminum interior, and 2-inch non-CFC polyurethane foam insulation.
Shelving
Four heavy-duty, epoxy-coated steel shelves are specified.
Condensate Management
Includes an automatic hot gas condensate evaporator.
Caster Plates
Equipped with 5-inch caster plates.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.