Continental Refrigerator SW60N8-FB-D Two-Section Refrigerated Sandwich Prep Table, 4 Drawers, 8-Pan Top, Front-Breathing

SKU: SW60N8-FB-D
$8,271.27
Free Shipping

Want to speak to an expert?

The Continental Refrigerator SW60N8-FB-D is a 60-inch, two-section sandwich unit refrigerator with front-breathing ventilation, four drawers, and an eight-pan top.

The top accommodates eight recessed 1/6-size pans that are 4 inches deep and includes a 12-inch full-length cutting board. Each drawer accommodates one 12 x 20 x 6-inch pan, supplied by others.

  • Stainless steel front, top, and end panels with an aluminum back and interior
  • Self-contained, rear-mounted refrigeration using natural R-290 refrigerant
  • Electronic controller with digital display and off-cycle defrost
  • 3-3/4-inch casters

Overall Dimensions:

60.0"W x 32.19"D x 41.0"H

Product Weight:

309.0 lb

Front-breathing design

The bottom-mounted front-breathing ventilation system is designed for installation flush against a wall or into a counter; the area under and in front of the cabinet must remain unobstructed.

Eight-pan top

The recessed top accommodates eight 1/6-size pans that are 4 inches deep and includes a 12-inch full-length nylon cutting board.

Four drawer configuration

The unit has four stainless steel roll-out drawers, with capacity for one 12 x 20 x 6-inch pan per drawer. Drawer pans are supplied by others.

R-290 refrigeration

The self-contained refrigeration system is rear-mounted and uses natural R-290 refrigerant.

Cabinet construction

The cabinet has stainless steel front, top, and end panels with an aluminum back and interior.

Electronic control

An electronic controller with digital display provides control, with off-cycle defrost.

Caster-equipped cabinet

The unit is equipped with 3-3/4-inch casters.

Unit Type Sandwich unit refrigerator
Sections 2
Access Type Drawers
Number of Drawers 4
Top Pan Capacity 8 recessed 1/6-size pans, 4 inches deep
Drawer Pan Capacity 1 pan per drawer, 12 x 20 x 6 inches; supplied by others
Cutting Board 12 inches deep, full-length nylon
Ventilation Front-breathing
Refrigeration Self-contained, rear-mounted
Refrigerant R-290
Temperature Range 33–41°F for pan product
Net Capacity 17.0 cubic feet
Cabinet Insulation 2-inch non-CFC polyurethane foam
Exterior Panels Stainless steel front, top, and end panels
Back and Interior Aluminum
Drawer Construction Stainless steel roll-out drawers
Casters 3-3/4 inches
Controller Electronic control with digital display
Defrost Off-cycle
Electrical 115/60/1
Total Amperage 5.7 A
Power Cord and Plug Attached 10-foot cord with NEMA-5-15P plug
Condensing Unit Size 1/3+ HP
Refrigeration Capacity 2560 BTU/h at +25°F evaporator and 90°F ambient

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified

Warranty & Protection

Seven-year parts, labor, and compressor warranty for self-contained units using R-290 refrigerant.

Frequently Asked Questions

The unit is 60 inches wide, 32.19 inches deep, and 41 inches high. The listed height includes the 3-3/4-inch casters.
The top accommodates eight recessed 1/6-size pans that are 4 inches deep, along with a 12-inch cutting board.
Each drawer accommodates one 12 x 20 x 6-inch pan. The drawer pans are supplied by others.
It uses self-contained, rear-mounted refrigeration with natural R-290 refrigerant.
Yes. Its bottom-mounted front-breathing ventilation system is designed to allow installation flush against a wall or into a counter, but the area under and in front of the cabinet must not be obstructed.
The listed electrical data is 115/60/1 at 5.7 amps, with an attached 10-foot cord and NEMA-5-15P plug. International data lists 220/50/1 at 3.6 amps.
The Continental R-290 warranty specifies seven years of parts, labor, and compressor coverage for the original purchaser in the United States and Canada, subject to the warranty terms.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.