Free shipping on your first order over $5000 – use code TeamUSA at checkout!
Continental Refrigerator  |  SKU: KC90SNSS

Continental Refrigerator KC90SNSS Back Bar Coolers

$8,312.00
Expected delivery date of , to your door
if ordered within hours and minutes
Not Shipping to ?
More Delivery Options
Documents
Cutsheet Installation & operation Map policy Warranty-hc Owner's manual
Related Searches
Commercial Beer Dispensers Commercial Refrigeration Commercial Refrigerators Restaurant Equipment

Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.

Description

Continental Refrigerator KC90SNSS 90" Shallow-Depth Keg Cooler

25 cu. ft. • 4-Keg Capacity • Front-Breathing Self-Contained

Keep the beer flowing, not the traffic behind your bar. At just 25 3/16" deep, the KC90SNSS slides neatly against back-bar walls yet still chills four full-size kegs— all in a rugged, all-stainless cabinet engineered for years of service.

Key Features
  • Space-saving shallow-depth footprint fits tight bar aisles.
  • Pre-cooled 3" stainless steel beer towers (2) with removable drip drainer.
  • Holds 4 barrel or straight-wall kegs, or up to 15 sixth-barrel kegs.
  • Front-breathing 1/4 HP refrigeration—no side clearance required.
  • Eco-friendly R-290 hydrocarbon refrigerant meets all federal & state regs.
  • Electronic controller with bright digital display, hi/low temperature alarm & off-cycle defrost.
  • Three lockable doors with magnetic Santoprene™ gaskets for a perfect seal.
  • Stainless steel exterior, countertop, interior sides & reinforced floor.
  • Automatic hot-gas condensate evaporator for low-maintenance operation.
  • cETLus & NSF listed; proudly made in the USA.
At-a-Glance Specs
Model KC90SNSS
Exterior Dimensions (W × D × H) 90" × 25 3/16" × 34 3/4" (without towers)
Interior Capacity 25 cu. ft.
Keg Capacity 4 × 1/2-barrel | 4 × straight-wall | 15 × 1/6-size
Doors 3, each with cylinder lock
Beer Towers 2 × 3" diameter, single faucet (standard)
Refrigerant R-290 Hydrocarbon
Compressor 1/4 HP, 2,670 BTU/hr (@ +25 °F evap., 90 °F ambient)
Electrical 115 V / 60 Hz / 1 ph • 5.8 A • NEMA 5-15P (10' cord)
Shipping Weight 530 lb.
Certifications cETLus, NSF
Built for Busy Bars
  • Low-profile 34 3/4" height slides under standard counters.
  • Reinforced stainless threshold & floor stand up to constant keg change-outs.
  • Louvered vents on front, rear & sides keep the condenser breathing.
  • Front-accessible condensing unit for fast service and cleaning.
  • Snap-in magnetic gaskets remove tool-free for quick sanitation.
Peace-of-Mind Warranty

Covered by Continental Refrigerator’s unmatched 7-year parts, labor & compressor warranty on all R-290 models.

Installation Note: This unit is completely front-breathing. Maintain at least 1" clearance at the back and 3" on the sides for optimal airflow.

Looking for casters, extra faucets, or wine racks? Ask our team about factory-approved options.

Features & Specs

Manufacturer

Continental Refrigerator

Certifications

NSF, cETLus

Height

34.75in

Width

90.0in

Depth

25.19in

Shipping Weight

555.0lbs

Top Style

flat top

Exterior Finish

all stainless steel exterior

Column Qty

2 columns / towers

Keg Capacity

3 - 4 kegs

Width

73" (and up)

Faucet Qty

1 faucet per column

Specifications

Keg Cooler, 90"W, 25.0 cu. ft., front breathing, (4) barrel or straight wall keg capacity, stainless steel top with (2) columns & drainer, 23" shallow depth, (3) doors with locks, electronic controller with digital display & hi-low alarm, stainless steel exterior, stainless steel interior back & side panels with reinforced stainless steel floor, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, cETLus, NSF
Back to top