Key specifications
- BTU
- 4,200 BTU
- Amps
- 10.1 Amps
- Phase
- 1-Phase
- Dimensions
- 52.0"W × 38.75"D × 83.25"H
- Type
- Reach-In Refrigerator
- Style
- Pass-Thru
Spec sheet
Continental Refrigerator Designer Line D2RNSAPTHD-GD-SD Pass-Thru Reach-In Refrigerator, Two-Section, Self-Contained, Glass Front/Stainless Rear
- Aluminum
- Stainless steel
- Aluminum
- Stainless steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The D2RNSAPTHD-GD-SD is a two-section pass-thru reach-in refrigerator with self-contained, top-mounted refrigeration.
It has a stainless steel exterior, aluminum interior, half-height glass doors on the front, and half-height stainless steel doors on the rear. The cabinet includes an electronic controller with digital display and 6 in. stainless steel legs.
- 50 cu. ft. net capacity
- Six shelves
- R-290 refrigerant
- 115 Volt, 1-Phase electrical configuration
Overall Dimensions:
52.0"W x 38.75"D x 83.25"HProduct Weight:
675.0 lbPass-Thru Access
Half-height glass doors are on the front, with half-height stainless steel doors on the rear.
Self-Contained Refrigeration
The refrigeration system is self-contained and top mounted.
Cabinet Construction
The cabinet has a stainless steel exterior and aluminum interior.
Electronic Control
An electronic controller provides a digital display.
Two-Section Capacity
The refrigerator has a 50 cu. ft. net capacity.
Stainless Steel Legs
Includes 6 in. stainless steel legs.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.