Key specifications
- BTU
- 206,000 BTU
- Dimensions
- 72.0"W × 28.0"D
- Type
- Combination Hotplate
- Installation Type
- Countertop
- Material
- Stainless Steel
- Finish
- Stainless Steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Comstock-Castle FHP72-30-2.5RB is a countertop gas combination unit with open burners, a griddle, and a char-broiler.
- Cooking sections: Two star burners, a 30-inch W x 21-inch D griddle area, and a 30-inch W x 21-inch D broiler area.
- Griddle: 3/4-inch-thick steel-finish griddle plate.
- Broiler: Cast iron char-broiler grates with iron radiants and sloped or flat grate configuration.
- Construction: Stainless steel exterior, three-sided stainless steel splash guards, and 4-inch stainless steel legs.
- Controls and output: Ten manual controls and 206,000 BTU total input.
- Connection: 3/4-inch gas connection.
Overall Dimensions:
72.0"W x 28.0"DProduct Weight:
600.0 lbCombination Cooking Sections
Includes two star burners, a 30-inch W x 21-inch D griddle area, and a 30-inch W x 21-inch D broiler area.
Two Star Burners
The front burner is rated at 24,000 BTU and the rear burner at 30,000 BTU.
3/4-Inch Griddle Plate
The griddle includes a 30-inch W x 21-inch D plate with 3/4-inch thickness.
Cast Iron Char-Broiler Grates
The broiler area uses cast iron grates with iron radiants and sloped or flat grate configuration.
Stainless Steel Construction
The unit has a stainless steel exterior, three-sided stainless steel splash guards, and 4-inch stainless steel legs.
Manual Controls
Ten manual controls are specified for the combination unit.
Gas Connection
The unit has a 3/4-inch gas connection and 206,000 BTU total input.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.