Key specifications
- BTU
- 174,000 BTU
- Dimensions
- 48.0"W × 28.0"D × 13.0"H
- Type
- Char-Broiler Combination
- Installation Type
- Countertop
- Material
- Stainless Steel
- Finish
- Stainless Steel
Comstock-Castle FHP48-2RB 48-Inch Char-Broiler/Hotplate
- Hotplate and char-broiler
- Hotplate, griddle and char-broiler
- Griddle and char-broiler
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The FHP48-2RB is a 48-inch countertop gas char-broiler/hotplate combination with four star burners and a 24 x 21-inch broiler area.
- Features cast iron grates that can be configured sloped or flat, iron radiants, and stainless steel splash guards on three sides.
- The stainless steel exterior is supported by 4-inch stainless steel legs and includes six manual controls.
- Total heat input is 174,000 BTU with a 3/4-inch gas connection.
Overall Dimensions:
48.0"W x 28.0"D x 13.0"HProduct Weight:
340.0 lbStar Burners
Four star burners are specified, with the front burner rated at 24,000 BTU and the rear burner rated at 30,000 BTU.
Broiler Area
The broiler area measures 24 x 21 inches.
Cast Iron Grates
Cast iron grates can be configured sloped or flat.
Iron Radiants
The broiler uses iron radiants.
Stainless Steel Splash Guards
Splash guards are provided on three sides.
Manual Controls
The unit has six manual controls.
Stainless Steel Legs
The unit includes 4-inch stainless steel legs.
Gas Connection
The specified gas connection is 3/4 inch.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.