Key specifications
- BTU
- 236,000 BTU
- Dimensions
- 72.0"W × 30.5"D × 37.0"H
- Type
- Combination Range
- Installation Type
- Floor Model
- Material
- Stainless Steel
- Finish
- Stainless Steel
Comstock-Castle F33033-30-2.5RB 72-Inch Combination Range
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Comstock-Castle F33033-30-2.5RB is a 72-inch commercial gas combination range with two open burners, a 20-inch manual-control griddle, a 30-inch charbroiler, a 31-inch oven, and a cabinet base.
Its two star burners use 12-inch square cast-iron grates; the front burner is rated at 24,000 BTU and the rear burner at 30,000 BTU. The griddle has a 3/4-inch plate, while the enamel-lined oven includes one rack.
The range has a stainless steel exterior, 7-inch backguard, 6-inch stainless steel legs, welded frame, and a 33-inch cabinet base with galvanized steel interior enclosed on three sides.
Overall Dimensions:
72.0"W x 30.5"D x 37.0"HProduct Weight:
960.0 lbCombination Cooking Top
Includes two open star burners, a 20-inch manual-control griddle, and a 30-inch charbroiler.
Open Burners
The front burner is rated at 24,000 BTU and the rear burner at 30,000 BTU; both use 12-inch square cast-iron grates.
Griddle
The 20-inch griddle has a 3/4-inch-thick plate and manual controls.
Charbroiler
The 30-inch charbroiler uses angle iron radiants.
Oven
The extra-wide 31-inch oven has an enamel lining and includes one rack.
Cabinet Base
The 33-inch cabinet base provides storage enclosed on three sides and has a galvanized steel interior.
Construction
Features a stainless steel exterior, 7-inch backguard, 6-inch stainless steel legs, and welded frame.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.