Key specifications
- BTU
- 204,000 BTU
- Dimensions
- 72.0"W × 30.5"D × 37.0"H
- Type
- Range
- Style
- Griddle Top
- Installation Type
- Floor Model
- Material
- Stainless Steel
Comstock-Castle 2F330-72 72-Inch Gas Range with Griddle and 2 Ovens
- None
- 3/4-in griddle (width not stated)
- 24-in, 3/4-in griddle
- 24-in raised griddle
- 30-in, 3/4-in griddle
- 30-in raised griddle
- 36-in, 3/4-in griddle
- 36-in raised griddle
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Comstock-Castle 2F330-72 is a 72-inch floor-model gas range with a 3/4-inch-thick griddle and two extra-wide 31-inch ovens.
- Griddle: One 3/4-inch-thick griddle with manual controls.
- Ovens: Two extra-wide 31-inch ovens with enamel bottom and door lining, one rack per oven, and three rack positions.
- Construction: Stainless steel exterior, welded frame, and 6-inch stainless steel legs.
- Configuration: Backriser with high shelf and a 2-inch clearance rating.
- Gas connection: 3/4-inch rear gas connection.
- Certifications: NSF and cETLus.
Overall Dimensions:
72.0"W x 30.5"D x 37.0"HProduct Weight:
1220.0 lb3/4-Inch Griddle
One 3/4-inch-thick griddle with manual controls.
Two Ovens
Two extra-wide 31-inch ovens with one rack per oven and three rack positions.
Oven Lining
Enamel bottom and door lining.
Stainless Steel Exterior
Stainless steel exterior with a welded frame.
Floor-Model Installation
Floor-model design with 6-inch stainless steel legs.
High Shelf
Backriser with high shelf.
Gas Connection
3/4-inch rear gas connection.
Gas Output
204,000 BTU.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Parts
Troubleshooting
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.