Component Hardware Encore KL70-9112-SE1 Wall-Mount Single Pantry Faucet, 12-Inch Stainless Steel Swing Spout, Ceramic Valve, Low Lead

SKU: KL70-9112-SE1 GTIN: 887882200960
$336.25
/each
Enter ZIP for a shipping estimate

Want to speak to an expert?

The Component Hardware Encore KL70-9112-SE1 is a wall-mount single pantry faucet with a 12-inch (305 mm) stainless steel horizontal tubular swing spout and a 1/4-turn ceramic valve.

  • Polished chrome-plated brass body with low-lead compliance
  • ADA-compliant single lever handle
  • 2.2 gpm aerated stream aerator at 60 psi
  • NSF/ANSI 61-G certified
  • SANIGUARD treatment incorporated on faucet touch points

Wall-mount installation

Designed for wall-mount installation with a single pantry faucet configuration.

Stainless steel swing spout

Includes a 12-inch (305 mm) horizontal tubular stainless steel swing spout.

Ceramic valve

The 1/4-turn full-volume ceramic valve includes an integral check valve to prevent cross-flow and back-flow.

Single lever handle

The single lever handle is ADA-compliant.

Aerated flow

A 2.2 gpm aerator provides an aerated stream at 60 psi.

Low-lead construction

The polished chrome-plated brass faucet body has less than 0.25% total lead by weighted average.

SANIGUARD treatment

SANIGUARD treatment is permanently incorporated on the faucet touch points.

NSF certification

Certified to NSF/ANSI 61-G.

Mounting Wall mount
Faucet type Single pantry faucet
Spout length 12 in (305 mm)
Spout material Stainless steel
Spout type Horizontal tubular swing spout
Valve type 1/4-turn ceramic valve
Handle type Single lever, ADA-compliant
Flow rate 2.2 gpm at 60 psi
Body material Polished chrome-plated brass
Lead content Less than 0.25% total lead by weighted average
Check valve Integral check valve
Operating temperature 40–180°F (5–83°C)
Operating pressure 15–125 psi
Certification NSF/ANSI 61-G
Approximate shipping weight 5 lb

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified

Warranty & Protection

Two-year parts warranty.

Frequently Asked Questions

The KL70-9112-SE1 is designed for wall-mount installation.
It has a 12-inch (305 mm) horizontal tubular swing spout made of stainless steel.
It uses a 1/4-turn full-volume ceramic valve with an integral check valve.
The faucet uses a 2.2 gpm aerator at 60 psi to provide an aerated stream.
Yes. The faucet body has less than 0.25% total lead by weighted average and is identified as low-lead compliant.
The faucet includes a two-year parts warranty.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.