Component Hardware

Component Hardware Encore KL41-8008-SE1 Deck-Mount Workboard Faucet, 8" Centers, 8" Stainless Steel Swing Spout, Compression Valves

SKU: KL41-8008-SE1 GTIN: 887882026683
$473.36
/each
Enter ZIP for a shipping estimate
Want to speak to an expert?
(888) 307-5030
Chat
Bulk pricing available

Related Searches

Best Sellers Commercial Faucets Commercial Faucets Commercial Faucets & Plumbing Commercial Plumbing Supplies Component Hardware Equipment Manual Faucets New Arrivals Plumbing & Water Treatment Restaurant Equipment Sinks & Handwashing Stations

The Encore KL41-8008-SE1 is a deck-mount workboard faucet with 8-inch on-center inlets, lever handles, and an 8-inch stainless steel tubular swing spout.

  • Valve: 1/4-turn full-volume compression valves with built-in check valves.
  • Flow: 2.2 gpm aerated stream aerator at 60 psi.
  • Construction: Polished chrome-plated brass body with a leak-resistant double O-ring spout seal.
  • Compliance: Low-lead compliant and NSF listed.

Product Weight:

5.0 lb

Deck-mount installation

Designed for deck mounting with 8-inch on-center inlets.

Stainless steel swing spout

Includes an 8-inch tubular horizontal swing spout with a double O-ring seal design.

Compression valves

Uses 1/4-turn full-volume compression valves with built-in check valves to help prevent cross-flow and back-flow.

Lever handles

Includes lever handles; the cutsheet identifies the handles as ADA-compliant.

Aerated stream

Equipped with a standard 2.2 gpm aerated stream aerator at 60 psi.

Low-lead construction

The faucet is identified as low-lead compliant; the cutsheet specifies total lead content below 0.25% by weighted average.

SANIGUARD treatment

The configuration specifies SANIGUARD treatment on the handles.

Mounting Type Deck mount
Faucet Centers 8 in (203 mm) on center
Spout Length 8 in (203 mm)
Spout Type Stainless steel tubular swing spout
Valve Type 1/4-turn full-volume compression valves with built-in check valves
Handle Type Lever
Aerator Flow Rate 2.2 gpm aerated stream at 60 psi
Inlet Size 1/2 in NPSM male inlets
Body Material and Finish Polished chrome-plated brass
Operating Temperature 40-180°F (5-83°C)
Operating Pressure 15-125 psi
Lead Compliance Low lead; total lead content less than 0.25% by weighted average

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified

Warranty & Protection

2-year parts warranty.

Documents

PDF Cutsheet PDF Download PDF Product page PDF Download PDF Press release - new website PDF Download

Frequently Asked Questions

The inlets are 8 inches (203 mm) on center.
It has an 8-inch (203 mm) stainless steel tubular horizontal swing spout.
It uses 1/4-turn full-volume compression valves with built-in check valves.
The standard aerator provides a 2.2 gpm aerated stream at 60 psi.
Yes. The faucet is identified as low-lead compliant, with total lead content below 0.25% by weighted average.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.

Talk to a Specialist
or call (888) 307-5030