Key specifications
- Construction
- Stainless steel
- Load Design
- Front
- Rack Configuration
- Single rack
- Door Clearance
- 31-3/4 in
- Water Consumption
- 1.1 gal per cycle
- Cycle Times
- 5 min, 6 min, 8 min, and 10 min
CMA Dishmachines PT-15 High-Temperature Single-Rack Pot & Pan Washer, Floor Model, 31-3/4-Inch Clearance, 208/240V 3-Phase
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The CMA Dishmachines PT-15 is a high-temperature single-rack pot and pan washer for extra-large wares. Its 31-3/4-inch door clearance accommodates large pots and sheet pans.
Four cycles, a 5-inch touch display, automatic operation, auto start and stop, a built-in booster heater, and a built-in wash tank heater support straightforward operation. The unit also features a pumped final rinse, standard gravity drain, double-skin construction, and a built-in water inlet strainer.
- Includes a 21-3/4 x 26-1/4-inch stainless steel rack.
- Uses 1.1 gallons of water per cycle.
- Constructed of stainless steel.
Overall Dimensions:
27.25"W x 31.5"D x 75.25"HProduct Weight:
400.0 lbHigh-temperature pot washing
Single-rack pot washer designed for extra-large wares.
Four cycle options
Provides 5-minute, 6-minute, 8-minute, and 10-minute cycles.
5-inch touch display
The display informs the user of machine status.
Automatic operation
Fully automatic cycles include auto start and stop.
Heater system
Includes a built-in booster heater and built-in wash tank heater.
Wash and rinse system
Features upper and lower stainless steel wash arms and a pumped final rinse.
Debris handling
Includes an integrated scrap tray and a water inlet with a built-in strainer.
Included rack
Includes a 21-3/4 x 26-1/4-inch stainless steel rack.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.