Free shipping on your first order over $5000 – use code TeamUSA at checkout!

Cleveland Range  |  Classic Convection  |  SKU: 36CGM300

Cleveland Range 36CGM300 Classic Convection Steamers (Countertop & Floor)

$43,236.00
FREE SHIPPING AVAILABLE!
Expected delivery date of , to your door
if ordered within hours and minutes
Not Shipping to ?
More Delivery Options

Documents

Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.

Description

Classic Convection 36-CGM-300 Two-Compartment Gas Steamer

300,000 BTU | 15 PSI NickelGuard™ Boiler Base | 36 in. Cabinet

Bring high-volume, high-velocity steam to your kitchen without sacrificing floor space. Cleveland Range’s Classic Convection pressureless steamer delivers instant, even convection steam to six full-size pans while letting you open the door mid-cycle for continuous production.

Key Advantages

  • Exclusive Convection Jet System – high-velocity steam circulation without a fan for faster, more even cooking.
  • Pressureless design allows doors to be opened any time—check, season or serve without a cooldown.
  • NickelGuard™ 15 PSI boiler with electronic spark ignition and automatic water fill for reliable startup.
  • Instant Steam Standby keeps the boiler at temperature so the unit is always ready to cook.
  • Free-floating, “cool-to-the-touch” door with slam/latch mechanism and reversible gasket for an air-tight seal.
  • 60-minute mechanical timer plus continuous-steam bypass switch on each compartment.
  • Automatic boiler drain & water-jet rinse cycle at shutdown to keep the drain line clear—no manual flushing.
  • Solid-state water-level control with primary & secondary low-water cut-off for operator safety.
  • 14-gauge stainless steel cavity with coved corners and removable slide racks for easy cleanup.
  • Fully insulated compartments & cabinet for maximum thermal efficiency.

Capacities & Performance

  • 6 × 12 in × 20 in × 2½ in pans (3 per compartment).
  • Continuous steaming output for schools, hotels and high-volume production lines.
  • 300,000 BTU natural or propane gas (field convertible, regulator included).

Construction Highlights

  • 36 in. modular cabinet base with left-hinged doors / right-side controls for convenient line-up.
  • FSS stainless steel base frame and 6 in NSF stainless legs with flanged feet (1 in adjustment).
  • Stainless steel insulated flue, compartment door steam shut-off switch, and gas pressure regulator all factory-installed.
  • All controls are front-serviceable for reduced downtime.

Technical Specifications

Model 36-CGM-300
Type Pressureless, gas-fired convection steamer with integral boiler
Compartments 2 (left-hinged doors)
Pan Capacity 3 × 12 × 20 × 2½ in per compartment (6 total)
Heat Input 300,000 BTU/hr
Boiler Pressure 15 PSI
Controls Power 115 V, 60 Hz, 1-phase (25 W) – hard-wire, non-GFI
Water Inlet ¾ in NPT cold water, 35–80 PSI
Drain Connection 1½ in IPS common drain (do not use PVC)
Overall Width 36 in (shipping width 44 in)
Overall Depth Approx. 37 in (shipping depth 42 in)
Overall Height Approx. 70 in to work surface (shipping height 80 in)
Shipping Weight 744 lb
Minimum Clearances 6 in sides & rear (12 in control side if adjacent equipment > 30 in high)

Included Safety Features

  • 15 PSI safety valve & high-limit pressure switch.
  • Compartment door interlock steam shut-off (SCS).
  • Secondary low-water cut-off (meets regional codes).
  • Cool exterior surfaces reduce operator burn risk.

Warranty & Start-Up

  • 1-year parts & labor warranty (18 months from shipment, whichever occurs first).
  • Additional 4-year prorated parts coverage on the pressure boiler.
  • Free factory-authorized performance start-up & water quality check upon request.

Water quality must meet Cleveland Range guidelines (TDS 50–250 ppm, hardness 50–200 ppm, pH 7.0–8.5, chloride < 50 ppm). Use of poor-quality feed water or failure to follow installation requirements may void the warranty.

Installation Notice: Gas-fired steamers must be installed beneath a properly ventilated hood and hard-wired to a dedicated 115 V circuit. Do not connect the drain to PVC piping or a GFI outlet.

Features & Specs

Manufacturer

Cleveland Range

Brand_name

Classic Convection

Height

62.0in

Width

35.43in

Depth

37.0in

Shipping Weight

744.0lbs

Type

1 steam generator

Pan Capacity per Compartment

(3) 12"x20"x2-1/2" deep

Interior Finish

stainless steel

Width (side - side)

36"

Specifications

Pressureless Convection Steamer, gas, 36", (2) compartments, (3) 12 x 20 x 2-1/2" pans/per compartment capacity, solid state controls, 60-minute mechanical timer & manual (continuous steaming) bypass switch, left-hand hinged door, controls on right, instant steam standby mode, auto drain, steam shut-off switch, stainless steel construction, FSS stainless steel base frame, 300,000 BTU