Carter-Hoffmann (Middleby) PH1860 Heated Cabinets & Holding Shelves
Carter-Hoffmann (Middleby) PH1860 Heated Cabinets & Holding Shelves is backordered and will ship as soon as it is back in stock.
Documents
Related Searches
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.
Description
Carter-Hoffmann Mobile Heated Transport Cabinet – 2 Door
Bottom-mount forced-air heat • Universal slides for up to 25 sheet pans / 50 steam-table pansKeep every entrée, side and dessert piping hot from kitchen to service with the durability only Carter-Hoffmann can deliver. This full-size, two-door PH-series cabinet couples rapid, even convection heating with a rugged chassis built to survive the toughest transport routes.
Key performance features
- Universal slide system holds (25) 18 × 26 in sheet pans or (50) 12 × 20 in steam-table pans.
- Slides adjust on 1.75 in (44 mm) centers; standard spacing 3.5 in (89 mm).
- Lift-out, bottom-mount convection module heats cabinet to 200 °F (93 °C) and pre-heats to 160 °F (71 °C) in ≈25 min.
- Remote-bulb dial thermometer offers at-a-glance temperature verification without opening the doors.
- All-welded, turned-in-seam stainless steel body with 14-ga caster bolsters for unmatched structural integrity.
- Double-panel doors with 1.5 in high-density fiberglass insulation and high-temperature magnetic gaskets.
- Concealed stainless pin hinges allow a full 270° swing; low-profile sliding latches stay protected during transport.
- Full-perimeter, non-marking vinyl bumper in a heavy-duty extruded aluminum frame shields walls and equipment.
- Heavy-duty 6 in (152 mm) polyurethane casters – 2 swivel with brakes, 2 rigid – in wheel-ahead pattern for effortless rolling over thresholds.
- cULus, UL EPH and CE listings meet the strictest global safety and sanitation codes.
Specification highlights
Pan capacity | (25) 18 × 26 in sheet pans (50) 12 × 20 in steam-table pans |
---|---|
Slide spacing | 3.5 in standard • adjustable in 1.75 in increments |
Heat system | Bottom-mount forced-air convection, lift-out for service |
Temperature range | Ambient to 200 °F (93 °C) |
Pre-heat time | To 160 °F (71 °C) in approximately 25 minutes |
Construction | All-welded stainless steel; 1.5 in fiberglass insulation |
Doors | 2 × stainless, double-panel, 270° swing, magnetic gasket |
Mobility | 6 in polyurethane casters (2 swivel/brake, 2 rigid) |
Bumper | Wrap-around, non-marking vinyl in aluminum frame |
Electrical | 120 V, 1 650 W, 13.7 A, 60 Hz, 1-ph • 10 ft cord with NEMA 5-15P plug |
Certifications | cULus • UL EPH • CE |
Warranty | 1 year parts & labor |
Looking for transport latches, marine packages or alternate electrical configurations? Carter-Hoffmann offers factory options to match virtually any application. Ask your rep for details.