Carter-Hoffmann (Middleby)

Carter-Hoffmann PH1225 Mobile Heated Holding Cabinet, 2-Door, 33-Pan Capacity

SKU: PH1225
$7,550.00
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Carter-Hoffmann PH1225 Mobile Heated Holding Cabinet, 2-Door, 33-Pan Capacity

Bottom-Mounted Forced-Air Heat, Insulated Stainless Steel, 120V

Keep large batches hot and ready for service with a mobile, insulated cabinet that holds 33 full-size pans and uses a removable bottom-mounted forced-air heater for even heat.

  • Holds up to 33 full-size 12 in. x 20 in. pans on removable slides.
  • Bottom-mounted lift-out heating system with blower-assisted forced-air heat helps maintain even temperatures.
  • Insulated, double-wall stainless steel construction is built for demanding foodservice use.
  • Two solid doors with heavy-duty gaskets provide easy access and heat retention.
  • Wrap-around bumper and 5-inch casters support safe transport and maneuverability.
  • 120V, 1650W, 13.7A, 1-phase electrical connection with a NEMA 5-15P plug.

Overall Dimensions:

46.75"W x 28.0"D x 58.0"H

Product Weight:

350.0 lb

Bottom-Mounted Removable Heater

Lift-out heating system makes service access easier while the bottom-mounted design supports even heat distribution.

Forced-Air Heat

Blower heat moves air throughout the cabinet for more uniform holding temperatures.

Insulated Double-Wall Construction

All-welded stainless steel construction with insulation helps retain heat during transport and holding.

33-Pan Capacity

Accommodates up to 33 full-size 12 in. x 20 in. pans on removable tray racks.

2.75-Inch Slide Centers

Removable pan slides are spaced on 2.75-inch centers for flexible loading.

Two Solid Insulated Doors

Double-panel doors with vinyl gaskets help seal in heat and support frequent use.

Mobile Transport Base

Five-inch casters in a wheel-ahead pattern make the cabinet easier to move; two casters are swivel and two are rigid.

Wrap-Around Bumper

Non-marking gray vinyl bumper helps protect the cabinet and surrounding equipment during transport.

Dial Thermometer And Thermostat Control

Full-range thermostat control knob and remote-sensing dial thermometer help monitor holding conditions.

Wide Door Access

Concealed pin hinges support 270° door swing for easier loading and unloading.

Type Heated Holding Cabinet
Style Mobile
Installation Type Freestanding
Compartments 1
Pan Capacity 33 Full-Size Pans
Pan Size 12 in. x 20 in. x 2.5 in.
Controls Dial Thermostat
Temperature Range Up To 200°F
Material Stainless Steel
Finish Stainless Steel
Voltage 120 Volts
Watts 1.65 kW
Amps 13.7 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 10 Feet
Country of Origin USA
Selling Unit Each
Units Per Case 1
Shipping Width 47 Inches
Shipping Depth 28 Inches
Shipping Height 58 Inches
Shipping Weight 350 lb.

Frequently Asked Questions

It accommodates up to 33 full-size 12 in. x 20 in. pans on removable slides.
It requires 120 volts, 1650 watts, 13.7 amps, 60 Hz, single-phase power and uses a NEMA 5-15P plug with a 10-foot cord.
The maximum temperature is 200°F (93°C), and it pre-heats to 160°F (71°C) in approximately 25 minutes.
Yes, it uses a removable, bottom-mounted lift-out heating system.
It includes 5-inch casters in a wheel-ahead pattern, with two swivel casters and two rigid casters, plus a wrap-around bumper.
The cabinet includes a one-year warranty for parts and labor.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.