Carter-Hoffmann (Middleby)

Carter-Hoffmann CW2E Top-Loading Forced-Air Nacho Chip Warmer, 3.00 Cu. Ft. Capacity

SKU: CW2E
$4,223.00
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Carter-Hoffmann CW2E Top-Loading Forced-Air Nacho Chip Warmer, 3.00 Cu. Ft. Capacity

Gravity feed, stainless steel construction, 4-inch adjustable legs.

Keep tortilla chips hot and fresh with top-mounted forced-air heat, gravity-feed rotation, and rugged stainless steel construction.

  • Top-mounted forced-air heating with Incoloy-sheathed elements delivers quick heat-up and even holding temperatures.
  • First-in, first-out gravity feed helps keep chips moving so product stays fresher during service.
  • All stainless steel cabinet construction supports durability and easy sanitation.
  • Extended side panels help reduce chip spillage and food waste.
  • Factory preset mechanical thermostat and on/off switch make operation simple.
  • Removable ducting, chip grates, and slide-out crumb pan simplify cleaning and maintenance.
  • Approximate 22-gallon chip capacity is well suited for high-volume service.

Overall Dimensions:

22.75"W x 23.0"D x 38.75"H

Product Weight:

135.0 lb

Top-Mounted Forced-Air Heating System

Lift-off heater with blower and Incoloy-sheathed heating elements forces air through rear ducting and up through the chip bed for even heat distribution and fast recovery.

First-In, First-Out Gravity Feed

Gravity-fed product rotation helps maintain chip freshness during service.

Stainless Steel Cabinet Construction

Completely welded stainless steel cabinet and liner provide durability and a sanitary, easy-to-clean finish.

Extended Side Panels

Extended side panels help contain chips and reduce spillage during operation.

Mechanical Thermostat Controls

Internal thermostat is factory preset to 175°F and adjustable with tools through a rear access hole; includes an on/off switch and power indicator light.

Bottom Hinged Service Door

Single-panel polished stainless steel service door opens from the bottom for loading and access.

Removable Cleaning Components

Removable ducting, chip grates, and the standard stainless steel crumb pan help make cleaning and service easier.

4-Inch Adjustable Legs

Adjustable legs provide stable placement and leveling.

Type Chip Warmer
Style Top Loading
Installation Type Floor Model
Capacity 3.00 Cubic Feet
Material Stainless Steel
Controls Mechanical Thermostat
Voltage 120 Volts
Amps 12.6 Amps
Watts 1.53 kW
Hertz 60 Hz
Phase 1-Phase
Plug Type NEMA 5-15P
Cord Length 6 Feet
Shipping Width 23 Inches
Shipping Depth 23 Inches
Shipping Height 39 Inches
Shipping Weight 135 lb.
Selling Unit Each
Units Per Case 1

Frequently Asked Questions

The CW2E has an approximate capacity of 3.00 cubic feet, or about 22 gallons of chips.
It uses a top-mounted forced-air heating system with Incoloy-sheathed heating elements and a blower for even heat distribution.
The unit operates on 1530 watts, 12.6 amps, 60 cycle, single phase, and includes a six-foot cord with a NEMA 5-15P plug.
The internal thermostat is factory preset to 175°F, and the unit is capable of heating to 190°F. It preheats to 160°F in approximately 20 minutes.
Cleaning is simplified by the lift-off heater, removable ducting and grates, and the slide-out stainless steel crumb pan.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.