Carter-Hoffmann (Middleby) BB150 Classic Carter Banquet Carts
Carter-Hoffmann (Middleby) BB150 Classic Carter Banquet Carts is backordered and will ship as soon as it is back in stock.
Documents
Related Searches
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.
Description
Classic Carter™ Mobile Heated Banquet Cabinet
Model BB150 | Middleby Essentials RapidShipServe every guest at the perfect temperature—even during high-volume events. The Classic Carter™ holds up to 180 pre-plated meals (8.75"–10.5") and delivers fast, even heat with rock-solid Carter-Hoffmann durability.
Why You’ll Love It
- Rapid heat-up: blower-assisted system reaches 160 °F (71 °C) in just 25 minutes; thermostat adjusts to 200 °F (93 °C).
- Even plate-to-plate holding: bottom-mounted removable convection heater circulates air uniformly throughout the cabinet.
- Built to roll anywhere: 6" polyurethane casters in an offset wheel-ahead pattern (2 swivel w/ brakes, 2 fixed) glide over thresholds and carpet.
- All-welded stainless steel: double-wall construction with 1" fiberglass insulation (1.5" on top) locks in heat and shrugs off dents.
- One-hand transport latch: flush sliding latch and concealed-pin hinges keep the single door sealed tight during moves.
- Full-length handles & wrap-around bumper: protect staff, walls and the cabinet itself in crowded back-of-house corridors.
- Plug-and-play 120 V: 10-ft cord with NEMA 5-15P fits standard outlets—no electrician required.
- cULus & UL EPH listed for electrical safety and sanitation confidence.
At-a-Glance Specs
Plate Capacity | Up to 180 covered plates (8.75"–10.5" Ø) |
---|---|
Number of Shelves | 3 removable, double nickel-plated wire shelves |
Clearance Between Shelves | 16 in | 406 mm |
Temperature Range | Ambient to 200 °F | 93 °C |
Preheat Time | 25 min to 160 °F | 71 °C (empty cabinet) |
Exterior Dimensions (H × W × D) | 64 3⁄4" × 61 1⁄2" × 30 1⁄2" (1645 × 1562 × 775 mm) |
Electrical | 120 V / 1-Ph / 60 Hz 1,650 W | 13.7 A 10 ft cord, NEMA 5-15P |
Net Weight | 472 lb | 214 kg |
Construction | All-welded 304 stainless steel, double-wall, high-density fiberglass insulation |
Mobility | 6" casters (2 swivel w/ brakes, 2 fixed) + non-marking vinyl bumper |
Warranty | 1 year parts & labor |
Operation Made Simple
- Plug cabinet into a dedicated 15 A outlet.
- Preheat empty cabinet for 25 minutes before loading plates.
- Load plates evenly on shelves—no carriers required.
- Set the thermostat to your desired holding temperature and monitor via the dial thermometer.
Capacity and heat-up times may vary with plate height, ambient conditions and loading practices.