Key specifications
- Type
- Sheet Pan Rack
- Style
- End Load
- Installation Type
- Floor Model
- Material
- Composite Plastic
- Country of Origin
- USA
- Color
- Brushed Graphite
Spec sheet
Cambro UPR1826F20580 20-Pan Full-Size End-Load Sheet Pan Rack, Composite Plastic, 3-Inch Spacing, 5-Inch Metal Casters
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Full-size end-load sheet pan rack with composite plastic construction, 3-inch rail spacing, and a capacity of 20 full-size or 40 half-size sheet pans.
- Holds 20 full-size 18 x 26-inch sheet pans or 40 half-size 13 x 18-inch sheet pans.
- Molded positioning ribs help keep pans centered, while molded ribs promote cooling and thawing airflow.
- Includes four 5-inch metal swivel casters with two locking and two non-locking casters.
- Supports 350 pounds per rack and 55 pounds per shelf.
- Temperature range is -36°F (-38°C) to 190°F (88°C).
- Ships knocked down with minimal assembly required.
The metal-caster configuration is not intended for use in freezers.
Overall Dimensions:
32.17"W x 25.5"D x 71.88"HProduct Weight:
63.7 lbFull-Size Pan Capacity
Holds 20 full-size 18 x 26-inch sheet pans or 40 half-size 13 x 18-inch sheet pans.
End-Load Design
Provides access to the rack contents from the end without a middle crossbar.
Molded Positioning Ribs
Raised positioning ribs help keep sheet pans and trays centered on the rails.
Composite Plastic Construction
Composite plastic components provide a non-rusting and non-corrosive rack construction.
Metal Swivel Casters
Four 5-inch center-stem metal swivel casters are included, with two locking and two non-locking casters.
Load Capacity
Supports 350 pounds per rack and 55 pounds per shelf.
Temperature Range
Rated for temperatures from -36°F (-38°C) to 190°F (88°C).
Knockdown Shipping
Ships knocked down with minimal assembly required.
Documentation
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.