Key specifications
- Type
- Shelving Unit
- Style
- Stationary Starter Unit
- Installation Type
- Floor Model
- Material
- Polypropylene
- Country of Origin
- USA
- Color
- Speckled Gray
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Camshelving® Premium stationary starter unit measures 72 inches wide x 24 inches deep x 64 inches high and provides four storage tiers with three vented and one solid polypropylene shelf plates.
It includes two unassembled post kits, eight traverses and molded-in dovetails. The shelf plates have Camguard® antimicrobial protection, and the unit withstands storage temperatures from -36°F (-38°C) to 190°F (88°C).
- 800 lb. capacity per shelf and 2,000 lb. maximum unit capacity
- Posts constructed with a steel core and polypropylene exterior
- Speckled gray finish
- Made in USA and NSF
Overall Dimensions:
72.0"W x 24.0"D x 64.0"HProduct Weight:
129.6 lbShelf Configuration
Includes three vented and one solid polypropylene shelf plates.
Camguard Antimicrobial Protection
The included shelf plates have molded-in Camguard antimicrobial protection.
Steel-Core Construction
Posts and traverses have a steel core with a polypropylene exterior.
Temperature Range
Withstands storage temperatures from -36°F (-38°C) to 190°F (88°C).
Adjustable Shelf Positioning
Shelf traverses can be removed and adjusted at 4-inch increments.
Cleaning
Posts and traverses wipe clean, while traverses and shelf plates remove for cleaning.
Assembly
Includes two unassembled post kits and eight traverses; some assembly is required using a rubber mallet only.
Weight Capacity
Supports 800 lb. per shelf and 2,000 lb. maximum unit capacity.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.