Key specifications

Amps
20 Amps
Phase
1-Phase
Dimensions
37.0"W × 25.0"D × 30.0"H
Type
Silver Burnisher
Style
Stationary Open-Top
Installation Type
Floor Model
Spec sheet
Blakeslee SKU: 1224

Blakeslee 1224 Floor Model Cutlery Burnisher

$14,042.41
/each
Estimated to ship in 16–19 business days
Included: Blakeslee warranty 1-year warranty for defective material and workmanship

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $1,299/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Specifications

Type Silver Burnisher
Style Stationary Open-Top
Installation Type Floor Model
Material Stainless Steel
Capacity 2 Gallons
Media Weight 160 lb
Motor Power 1.5 HP
Motor Speed 3,450 RPM
Voltage 115 Volts
Amps 20 Amps
Hertz 60 Hz
Phase 1-Phase
Access Doors 2
Compound Bottles 2 x 1 Pint
Operating Time Less Than 10 Minutes
Noise Level < 85 dBA

Description

The Blakeslee 1224 is a stationary silver saver burnisher with an open-top design for easy loading and unloading. Its porcelain-ceramic media and compound are specified to restore luster and brightness to stainless steel flatware, hollowware, aluminum ware, pewter, and silverware.

The unit has stainless steel construction, two access doors, a 2-gallon compound tank and pump, four adjustable feet, and no external plumbing.

  • Motor: 1.5 HP drive motor operating at 3,450 RPM.
  • Electrical: 115 Volts, 20 Amps, 60 Hz, single phase, with a grounded cord and plug.
  • Operating time: Less than 10 minutes.

Overall Dimensions:

37.0"W x 25.0"D x 30.0"H

Product Weight:

580.0 lb

Open-Top Design

Supports easy loading and unloading.

Porcelain-Ceramic Media

The unit is specified with 160 lb of porcelain-ceramic media.

Burnishing Applications

The media and compound are specified for stainless steel flatware, hollowware, aluminum ware, pewter, and silverware.

Stainless Steel Construction

Stainless steel is specified for the product construction.

Access Doors

Two access doors are specified in the stainless steel skirt and cover.

Compound Tank and Pump

The unit has a stainless steel compound tank with 2-gallon capacity and a pump.

Motor

1.5 HP drive motor operating at 3,450 RPM.

Adjustable Feet

Four adjustable feet.

External Plumbing

No external plumbing.

Noise Level

Noise level is specified as less than 85 dBA.

Frequently Asked Questions

It is a stationary, open-top silver saver burnisher.
It uses 160 lb of porcelain-ceramic media.
The unit is specified for 115 Volts, 20 Amps, 60 Hz, single phase, with a grounded cord and plug.
The dimensions are 37 in wide, 25 in deep, and 30 in high.
No. The cutsheet specifies no external plumbing.
The compound tank capacity is 2 gallons.
The cutsheet states that the unit can restore luster and brightness to stainless steel flatware, hollowware, aluminum ware, pewter, and silverware.
The cutsheet lists 1 year for defective material and workmanship and a 3-year warranty entry for the tub lining.

This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.

The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.

What to have ready on delivery day

  • Count every piece against the delivery receipt.
  • Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
  • Photograph the freight on the truck before it’s moved.
  • If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.

Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.

How to inspect and sign for freight

Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.

If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.

Reporting damage after delivery

Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030